94.3 LTE Information Elements
Information Elements with Configurable Update Intervals
Certain information elements can be configured to be updated on specific time intervals rather than each time a new report arrives. This setting is made under File > Options > LTE Options
Chipset Vendor Support
The chipset vendor support information provided is an indication of which information elements that can be expected to be produced for different chipsets.
Note: this is not an absolute truth. IEs might be supported for certain firmware versions only, subject to device capabilities or network configurations, etc.
| IE Name | Description | Refined |
|---|---|---|
Height above sea level in feet. Reported by positioning equipment. Unit: foot Range: -1312 ... 29028 Chipset Vendors: GeoCoordinates, Garmin, NMEA, OnDevice, PCTEL, Pinpoint | ✔ | |
Height above sea level in meters. Reported by positioning equipment. Unit: meter Range: -400 ... 8848 Chipset Vendors: GeoCoordinates, Garmin, NMEA, OnDevice, PCTEL, Pinpoint | ✔ | |
Physical layer cell identity of a cell which the UE has been instructed by the eNodeB to look for and report the CGI for. This may be an EUTRAN, UTRAN, or GERAN cell. ► 3GPP 36.331, sections 5.5.3–5 and 6.3.5, parameter cellForWhichToReportCGI The UE may conceivably have several such reporting orders assigned at the same time. If so, only one cell is presented. Chipset Vendors: Common | ||
Feature group indicators determining the UE's capability to perform ANR measurements. ► 3GPP 36.331, sections 6.3.6 and B.1 5 Long DRX cycle, DRX command MAC control element 17 Periodical measurement reporting for intra-frequency ANR 18 Periodical measurement reporting for inter-frequency ANR 19 Periodical measurement reporting for inter-RAT ANR Chipset Vendors: Common | ||
Populated when the UE is instructed to report CGI for an EUTRAN cell that is on a different carrier from the current serving cell. Cleared when the corresponding measId is removed. Example: 'Yes, EARFCN: 6300, PCI: 38' Chipset Vendors: Common | ||
Populated when the UE is instructed to report CGI for a non-EUTRAN cell. Cleared when corresponding measId is removed. Examples: 'Yes, RAT: GERAN, ARFCN: 19'; 'Yes, RAT: UTRA, UARFCN: 10638, PSC: 14' Chipset Vendors: Common | ||
Populated when the UE is instructed to report CGI for an EUTRAN cell that is on the same carrier as the current serving cell. Cleared when corresponding measId is removed. Example: 'Yes, PCI: 38' Chipset Vendors: Common | ||
This information element takes the value 'Yes' if and when a reportConfig is observed with Purpose set to reportCGI: ► 3GPP 36.331, section 5.5.4.1. It does not follow that the UE is currently using the reportConfig; the value 'Yes' only indicates that ANR as such is enabled in the network. Chipset Vendors: Common | ||
Cell reported by the UE. Normally identical to 'ANR Cell For Which To Report CGI', except possibly if the UE has been given multiple reporting orders of this kind, in which case only one cell is presented. The string has the following format: LTE intra-frequency: 'Physical Layer Cell Id' LTE inter-frequency: 'EARFCN', 'Physical Layer Cell Id' WCDMA inter-RAT: 'UARFCN', 'SC' GSM inter-RAT: 'ARFCN', 'BSIC' Chipset Vendors: Common | ||
CGI of the cell reported by the UE, that is, of 'ANR Reported Cell'. Formats: EUTRAN cell: MCC, MNC, TAC, UC-Id UTRAN cell: PLMN, LAC, UC-Id GERAN cell: PLMN, LAC, C-Id Chipset Vendors: Common | ||
Current attach type. One of: 'EPS Attach', 'Combined EPS/IMSI Attach' Chipset Vendors: Common | ||
0 Unknown status 1 Idle 2 Active 3 Holding 4 Originating Call 5 Alerting 6 Incoming Call 7 Disconnecting 8 Incoming Call Initiated Range: 0 ... 8 Chipset Vendors: Qualcomm, Ericsson, Samsung, HiSilicon, Intel | ✔ | |
See 'Audio Call State (Num)' Chipset Vendors: Qualcomm, Ericsson, Samsung, HiSilicon, Intel | ✔ | |
Data radio bearer associated with EPS bearer Argument: [1 ... 11] EPS bearer index Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ||
The default EPS bearer that each dedicated EPS bearer is associated with. Invalid if the bearer is itself a default bearer, i.e. only valid for dedicated bearers. Regarding the EPS bearer identity see ► 3GPP 24.007 Argument: [1 ... 11] EPS bearer index Range: 5 ... 15 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ||
Guaranteed downlink bit rate for each EPS bearer. ► 3GPP 24.301, section 9.9.4.3 Argument: [1 ... 11] EPS bearer index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ||
Guaranteed uplink bit rate for each EPS bearer. ► 3GPP 24.301, section 9.9.4.3 Argument: [1 ... 11] EPS bearer index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ||
Identity number of each EPS bearer Argument: [1 ... 11] EPS bearer index Range: 5 ... 15 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
The party that initiated each EPS bearer: UE or network Argument: [1 ... 11] EPS bearer index Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ||
Maximum downlink bit rate for each EPS bearer. ► 3GPP 24.301, section 9.9.4.3 Argument: [1 ... 11] EPS bearer index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ||
Maximum uplink bit rate for each EPS bearer. ► 3GPP 24.301, section 9.9.4.3 Argument: [1 ... 11] EPS bearer index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ||
Number of configured EPS bearers for the UE Range: 1 ... 11 | ||
The PDN connection that each EPS bearer is associated with Argument: [1 ... 11] EPS bearer index Range: 0 ... 8 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
QoS Class Identifier of each EPS bearer. ► 3GPP 23.203, section 6.1.7.2 Argument: [1 ... 11] EPS bearer index Range: 1 ... 9 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ||
Type of each EPS bearer. One of: 'Undefined', 'Default', 'Dedicated' Argument: [1 ... 11] EPS bearer index Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ||
Coverage Enhancement level Range: 0 ... 3 Chipset Vendors: Qualcomm | ✔ | |
Coverage Enhancement mode, 'Mode A' or 'Mode B' Chipset Vendors: Qualcomm | ✔ | |
Number of repetitions for Coverage Enhancement CSI RS Range: 1 ... 32 Chipset Vendors: Qualcomm | ||
Maximum number of repetitions for Coverage Enhancement MPDCCH Range: 1 ... 256 Chipset Vendors: Qualcomm | ✔ | |
Current number of repetitions for Coverage Enhancement PRACH MSG1 Range: 1 ... 128 Chipset Vendors: Qualcomm | ✔ | |
Number of repetitions for Coverage Enhancement PUCCH Format 1 Range: 1 ... 32 Chipset Vendors: Qualcomm | ✔ | |
Number of repetitions for Coverage Enhancement PUCCH Format 2 Range: 1 ... 32 Chipset Vendors: Qualcomm | ✔ | |
Current number of repetitions for Coverage Enhancement PDSCH Range: 0 ... 2048 Chipset Vendors: Qualcomm | ✔ | |
Maximum number of repetitions for Coverage Enhancement PDSCH Range: 16 ... 2048 Chipset Vendors: Qualcomm | ✔ | |
Current number of repetitions for Coverage Enhancement MSG4 on PUCCH Range: 0 ... 32 Chipset Vendors: Qualcomm | ✔ | |
Maximum number of repetitions for Coverage Enhancement MSG4 on PUCCH Argument: [0 ... 3] Coverage enhancement level Range: 1 ... 32 Chipset Vendors: Qualcomm | ✔ | |
Current number of repetitions for Coverage Enhancement PUSCH Range: 0 ... 2048 Chipset Vendors: Qualcomm | ✔ | |
Maximum number of repetitions for Coverage Enhancement PUSCH Range: 8 ... 2048 Chipset Vendors: Qualcomm | ✔ | |
Allowed bandwidth for inter-frequency cell reselection measurements. Given as a number of resource blocks (RBs). Argument: [1 ... 8] Points to an E-UTRA frequency Range: 6 ... 100 Chipset Vendors: Common | ||
Allowed bandwidth for intra-frequency cell reselection measurements. Given as a number of resource blocks (RBs). Range: 6 ... 100 Chipset Vendors: Common | ||
Range: 0 ... 262143 Chipset Vendors: Common | ||
True if the cell is barred, else False Chipset Vendors: Common | ||
Range: 0 ... 503 Chipset Vendors: Common | ||
EARFCNs of E-UTRA cells that are candidates for inter-frequency cell reselection Argument: [1 ... 8] Index Range: 0 ... 262143 Chipset Vendors: Common | ||
ARFCNs of GERAN cells that are candidates for inter-RAT cell reselection Argument: [0 ... 63] Index Range: 0 ... 1023 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ||
Argument: [1 ... 64] Cell list index Range: -140 ... 25 | ||
Requires that a cell file is loaded Argument: [1 ... 64] Cell list index Unit: meter Range: 0 ... 100000 | ||
Argument: [1 ... 64] Cell list index Range: 0 ... 262143 | ||
Cell List Frame Timing Offset Rx1 Cell List Frame Timing Offset Rx2 | Argument: [1 ... 8] Cell list index Range: -153599 ... 153600 | |
Cell List Frame Timing Rx2 | Argument: [1 ... 8] Cell list index Range: 0 ... 307199 | |
Cell name from cell file (requires a cell file loaded in the application) Argument: [1 ... 64] Cell list index | ||
Number of items in the cell list Range: 1 ... 64 | ||
General information about Cell List information elements: Cell List information elements are what is shown in the LTE 'Serving/Neighbor Cell' status window. They contain the same information as the 'Serving Cell' and 'Neighbor Cell' elements, except that there is an additional element indicating the type of each cell: see below. Argument: [1 ... 64] Cell list index Range: 0 ... 503 | ||
Argument: [1 ... 64] Cell list index Range: 0 ... 2 | ||
Argument: [1 ... 64] Cell list index Range: 0 ... 167 | ||
Argument: [1 ... 64] Cell list index Unit: dBm Range: -140 ... 25 | ||
Cell List RSRP Tx1 Rx2 (dBm) Cell List RSRP Tx1 Rx3 (dBm) Cell List RSRP Tx1 Rx4 (dBm) | RSRP contribution from eNodeB antenna Tx1 and Rx1/Rx2/Rx3/Rx4 Argument: [1 ... 64] Cell list index Unit: dBm Range: -140 ... 25 | |
Argument: [1 ... 64] Cell list index Unit: dB Range: -40 ... 40 | ||
Cell List RSRQ Tx1 Rx2 (dB) Cell List RSRQ Tx1 Rx3 (dB) Cell List RSRQ Tx1 Rx4 (dB) | RSRQ contribution from eNodeB antenna Tx1 and Rx1/Rx2/Rx3/Rx4 Argument: [1 ... 64] Cell list index Unit: dB Range: -40 ... 40 | |
One of: SC: Serving cell (single carrier used) PCell: Primary serving cell (carrier aggregation used) SCell1 ... SCell7: Secondary serving cell no. 1 ... 7 MN: Monitored neighbor DN: Detected neighbor Argument: [1 ... 64] Cell list index | ||
Qhyst, hysteresis value for cell ranking criteria. ► 3GPP 36.304, section 5.2.4.7 Unit: dB Range: 0 ... 24 Chipset Vendors: Common | ||
Qoffsetfrequency, frequency-specific offset for equal-priority E-UTRA frequencies. ► 3GPP 36.304, section 5.2.4.7 Argument: [1 ... 8] Points to an E-UTRA frequency Unit: dB Range: -24 ... 24 Chipset Vendors: Common | ||
Qqualmin, minimum required quality level in cell Unit: dB Range: -34 ... -3 Chipset Vendors: Common | ||
Qrxlevmin, minimum required Rx level in cell. ► 3GPP 36.304, section 5.2.4.7 Unit: dBm Range: -140 ... -44 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ||
Corresponds to Qrxlevminoffset, offset to the signaled Qrxlevmin taken into account in the Srxlev evaluation as a result of a periodic search for a higher priority PLMN while camped normally in a VPLMN. ► 3GPP 36.304, section 5.2.3.2 The actual information element value is equal to q-RxLevMinOffset, broadcast in SIB type 1 (► 3GPP 36.331, section 6.2.2). Qrxlevminoffset = information element value * 2 [dB]. Range: 0 ... 8 Chipset Vendors: Common | ||
Absolute priority of carrier frequency used in inter-frequency cell reselection procedure. Derived from SIB type 5. ► 3GPP 36.304, section 5.2.4.7 Argument: [1 ... 8] Points to an E-UTRA frequency Range: 0 ... 7 Chipset Vendors: Common | ||
Absolute priority of carrier frequency as stated in SIB type 3. ► 3GPP 36.304, section 5.2.4.7 Range: 0 ... 7 Chipset Vendors: Common | ||
EARFCN for each cell in the statistics list Argument: [1 ... 20] Cell statistics cell index Range: 0 ... 262143 Chipset Vendors: Qualcomm, Samsung | ✔ | |
PCI for each cell in the statistics list Argument: [1 ... 20] Cell statistics cell index Range: 0 ... 503 Chipset Vendors: Qualcomm, Samsung | ✔ | |
Accumulated byte count of all transport blocks with CRC OK, for each cell in the statistics list Argument: [1 ... 20] Cell statistics cell index Range: 0 ... 2147483648 Chipset Vendors: Qualcomm, Samsung | ✔ | |
Srxlev threshold used by the UE on the serving cell when reselecting towards a lower priority RAT/frequency Unit: dB Range: 0 ... 62 Chipset Vendors: Common | ||
CDMA2000 inter-RAT cell reselection Srxlev threshold 'High' Argument: [1 ... 32] Points to a CDMA2000 frequency Unit: dB Range: 0 ... 62 Chipset Vendors: Common | ||
E-UTRA inter-frequency cell reselection Srxlev threshold 'High' Argument: [1 ... 8] Points to an E-UTRA frequency Unit: dB Range: 0 ... 62 Chipset Vendors: Common | ||
GERAN inter-RAT cell reselection Srxlev threshold 'High' Argument: [1 ... 16] Points to a GERAN frequency Unit: dB Range: 0 ... 62 Chipset Vendors: Common | ||
UTRA inter-RAT cell reselection Srxlev threshold 'High' for FDD LTE Argument: [1 ... 16] Points to a UTRA frequency Unit: dB Range: 0 ... 62 Chipset Vendors: Common | ||
UTRA inter-RAT cell reselection Srxlev threshold 'High' for TDD LTE Argument: [1 ... 16] Points to a UTRA frequency Unit: dB Range: 0 ... 62 Chipset Vendors: Common | ||
CDMA2000 inter-RAT cell reselection Srxlev threshold 'Low' Argument: [1 ... 32] Points to a CDMA2000 frequency Unit: dB Range: 0 ... 62 Chipset Vendors: Common | ||
E-UTRA inter-frequency cell reselection Srxlev threshold 'Low' Argument: [1 ... 8] Points to a UTRA frequency Unit: dB Range: 0 ... 62 Chipset Vendors: Common | ||
GERAN inter-RAT cell reselection Srxlev threshold 'Low' Argument: [1 ... 16] Points to a GERAN frequency Unit: dB Range: 0 ... 62 Chipset Vendors: Common | ||
UTRA inter-RAT cell reselection Srxlev threshold 'Low' for FDD LTE Argument: [1 ... 16] Points to a UTRA frequency Unit: dB Range: 0 ... 62 Chipset Vendors: Common | ||
UTRA inter-RAT cell reselection Srxlev threshold 'Low' for TDD LTE Argument: [1 ... 16] Points to a UTRA frequency Unit: dB Range: 0 ... 62 Chipset Vendors: Common | ||
Timer TreselectionRAT for inter-RAT cell reselection to CDMA2000 (1x). ► 3GPP 36.304, section 5.2.4.7 Unit: second Range: 0 ... 7 Chipset Vendors: Common | ||
Timer TreselectionRAT for inter-RAT cell reselection to GERAN (GSM) Range: 0 ... 7 Chipset Vendors: Common | ||
Timer TreselectionRAT for inter-frequency cell reselection within E-UTRA Argument: [1 ... 8] Points to an E-UTRA frequency Unit: second Range: 0 ... 7 Chipset Vendors: Common | ||
Timer TreselectionRAT for intra-frequency cell reselection within E-UTRA Unit: second Range: 0 ... 7 Chipset Vendors: Common | ||
Timer TreselectionRAT for inter-RAT cell reselection to UTRA (UMTS) Unit: second Range: 0 ... 7 Chipset Vendors: Common | ||
CQI Code Word 1 | Channel Quality Indicator for code word 0/1. ► 3GPP 36.213, section 7.2.3 Argument: [1 ... 6] Serving cell index Range: 0 ... 15 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ |
CQI code word 0 averaged over one second Argument: [1 ... 6] Serving cell index Range: 0 ... 15 Chipset Vendors: Common | ✔ | |
CQI code word 1 averaged over one second Argument: [1 ... 6] Serving cell index Range: 0 ... 15 Chipset Vendors: Common | ✔ | |
Periodicity of CQI reporting using PUCCH. ► 3GPP 36.213, section 7.2.2 Chipset Vendors: Qualcomm, HiSilicon | ||
Channel Quality Indicator for code word 0, counting only samples with specific rank indication Argument: [1 ... 6] Serving cell index Range: 0 ... 15 Chipset Vendors: Common | ✔ | |
'CQI Rank 1/2 code word 0' averaged over one second Argument: [1 ... 6] Serving cell index Range: 0 ... 15 Chipset Vendors: Common | ✔ | |
Channel Quality Indicator for code word 0, counting only samples with specific rank indication Argument: [1 ... 6] Serving cell index Range: 0 ... 15 Chipset Vendors: Common | ✔ | |
'CQI Rank 1/2 Code Word 0' averaged over one second Argument: [1 ... 6] Serving cell index Range: 0 ... 15 Chipset Vendors: Common | ✔ | |
PUCCH CQI reporting mode as defined in ► 3GPP 36.213, section 7.2.2: one of 'Mode 1-0', 'Mode 1-1', 'Mode 2-0', 'Mode 2-1' Chipset Vendors: Qualcomm | ||
Cell Radio Network Temporary Identifier Range: 0 ... 65535 Chipset Vendors: Qualcomm, Ericsson, Samsung, HiSilicon, Intel | ||
Uplink cyclic prefix length Chipset Vendors: Qualcomm, Intel | ✔ | |
General information about DRX information elements: The DRX information elements relate to the Discontinuous Reception mechanism: ► 3GPP 36.321, especially section 5.7. Percentage of time DRX has been enabled Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm | ||
Number of consecutive PDCCH-subframes after the UE successfully decoded a PDCCH indicating an initial UL or DL user data transmission Range: 1 ... 1280 Chipset Vendors: Common | ||
Status of DRX Inactivity timer. 0: Disabled, 1: Enabled Range: 0 ... 1 Chipset Vendors: Qualcomm, HiSilicon | ||
Length of long DRX cycle, expressed as a number of PDCCH-subframes Range: 10 ... 2560 Chipset Vendors: Common | ||
Number of consecutive PDCCH-subframes at the beginning of a DRX cycle Range: 1 ... 200 Chipset Vendors: Common | ||
Status of DRX On Duration timer. 0: Disabled, 1: Enabled Range: 0 ... 1 Chipset Vendors: Qualcomm, HiSilicon | ||
Maximum number of consecutive PDCCH-subframes for which the UE has to monitor the PDCCH for an expected retransmission Range: 1 ... 33 Chipset Vendors: Common | ||
Length of short DRX cycle, expressed as a number of PDCCH-subframes Range: 10 ... 2560 Chipset Vendors: Common | ||
Use of DRX short cycle. 0: Disabled, 1: Enabled Range: 0 ... 1 Chipset Vendors: Qualcomm, HiSilicon | ||
Number of consecutive subframes for which the UE shall follow the short DRX cycle Range: 1 ... 16 Chipset Vendors: Common | ||
Subframe where the DRX cycle starts Range: 0 ... 2559 Chipset Vendors: Common | ||
Duplex mode indication. 0: FDD, 1: TDD Argument: [1 ... 6] Serving cell index Range: 0 ... 1 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Same as 'Duplex Mode' but in text format Argument: [1 ... 6] Serving cell index Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Extended Discontinuous Reception paging time window Unit: second Range: 0 ... 41 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
Extended Discontinuous Reception sleeping duration Unit: second Range: 0 ... 10486 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
eMBMS: Indicates whether the eNodeB belongs to one eMBMS area or to several such areas (each having its own MCCH). 0: Single area, 1: Multiple areas Range: 0 ... 1 Chipset Vendors: Common | ✔ | |
Same as 'eMBMS Area Type (Num)' but in text format Chipset Vendors: Common | ✔ | |
EPS Mobility Management state. ► 3GPP 24.301, section 5.1.3.2 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
EPS Mobility Management substate. ► 3GPP 24.301, section 5.1.3.2 Chipset Vendors: Qualcomm, HiSilicon, Intel | ✔ | |
Number of antennas in the eNodeB. Note: Only valid when RRC State: Connected Argument: [1 ... 6] Serving cell index Range: 1 ... 4 Chipset Vendors: Qualcomm, Samsung | ||
General information about EPower Ana Sc information elements: 'EPower Ana Sc' information elements originate from enhanced power scanning. List of frequencies scanned Argument: [1 ... 2559] Power scanning index Unit: kHz Range: 410000 ... 5925000 Chipset Vendors: Common | ||
Number of frequencies scanned Range: 0 ... 2560 | ||
RSSI for each frequency scanned Argument: [1 ... 2559] Power scanning index Unit: dBm Range: -140 ... 25 Chipset Vendors: Common | ||
Time as reported in device timestamp. Given in the format 'hh:mm:ss.ddd', where 'ddd' = decimal seconds. | ||
EPS Session Management state Argument: [1 ... 9] Radio bearer index Chipset Vendors: Qualcomm | ||
Device feature group indicators according to ► 3GPP 36.331, Annexes B and C. Each string tells whether the feature group is supported ('YES', 'NO', or 'N/A') and defines the contents of the feature group. Argument: [1 ... 116] FGI index Chipset Vendors: Common | ||
Hex string summarizing device feature group support as described by the 'Feature Group Indicator' element. Equivalent to a binary string where 'YES' is represented by 1, and where 'NO' and 'N/A' are represented by 0. Chipset Vendors: Common | ||
Version number of device firmware | ||
General information about GSM Neigh information elements: GSM neighbors are sorted by decreasing RxLev. ARFCNs of measured GSM neighbors. Argument: [1 ... 32] GSM neighbor index Range: 0 ... 1023 Chipset Vendors: Qualcomm, Ericsson | ||
Base Station Identity Codes of measured GSM neighbors Argument: [1 ... 32] GSM neighbor index Range: 0 ... 77 Chipset Vendors: Qualcomm, Ericsson | ||
Same as 'GSM Neigh BSIC' but in text format Argument: [1 ... 32] GSM neighbor index Chipset Vendors: Qualcomm, Ericsson | ||
Number of measured GSM neighbors Range: 0 ... 32 | ||
Received signal strength of measured GSM neighbors Argument: [1 ... 32] GSM neighbor index Unit: dBm Range: -120 ... -10 Chipset Vendors: Qualcomm, Ericsson | ||
Hardware model | ||
Hardware identification string | ||
Direction of travel measured in degrees clockwise from north. Reported by positioning equipment. Unit: degree Range: 0 ... 360 Chipset Vendors: Garmin, NMEA, OnDevice, PCTEL | ||
International Mobile Subscriber Identity | ||
Latitude recorded by positioning equipment Unit: degree Range: -90 ... 90 | ||
Latitude as text. Example: 'N 38°57.9198' | ||
Latitude in decimal degrees, presented as text | ||
Longitude recorded by positioning equipment Unit: degree Range: -180 ... 180 | ||
Longitude as text. Example: 'W 77°22.4014' | ||
Longitude in decimal degrees, presented as text | ||
Equipment timestamp of first MAC layer packet received after a handover Unit: ms Range: 0 ... 86400000 Chipset Vendors: Qualcomm, HiSilicon | ||
Equipment timestamp of last MAC layer packet received before a handover Unit: ms Range: 0 ... 86400000 Chipset Vendors: Qualcomm, HiSilicon | ||
Duration of downlink data transfer interruption at the MAC layer in connection with a handover Range: 0 ... 1000 Chipset Vendors: Qualcomm, HiSilicon | ||
Argument: [1 ... 6] Serving cell index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, HiSilicon | ✔ | |
Argument: [1 ... 6] Serving cell index Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, HiSilicon | ✔ | |
Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, HiSilicon, Neul | ✔ | |
Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, HiSilicon, Neul | ✔ | |
Maximum number of retransmissions in MAC layer HARQ processes Range: 0 ... 28 Chipset Vendors: Common | ||
Range: 0 ... 1000000000 Chipset Vendors: Qualcomm | ||
Range: 0 ... 1000000000 Chipset Vendors: Qualcomm | ||
Equipment timestamp of first MAC layer packet transmitted after a handover Unit: ms Range: 0 ... 86400000 Chipset Vendors: Qualcomm, HiSilicon | ||
Equipment timestamp of last MAC layer packet transmitted before a handover Unit: ms Range: 0 ... 86400000 Chipset Vendors: Qualcomm, HiSilicon | ||
Duration of uplink data transfer interruption at the MAC layer in connection with a handover Unit: ms Range: 0 ... 1000 Chipset Vendors: Qualcomm, HiSilicon | ||
Argument: [1 ... 6] Serving cell index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, HiSilicon | ✔ | |
Argument: [1 ... 6] Serving cell index Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, HiSilicon | ✔ | |
Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, HiSilicon, Neul | ✔ | |
Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, HiSilicon, Neul | ✔ | |
eMBMS: Indicates whether a Multicast Control Channel is configured. 0: No, 1: Yes Range: 0 ... 1 Chipset Vendors: Common | ✔ | |
Same as 'MCCH Configured (Num)' but in text format Chipset Vendors: Common | ✔ | |
Contains the hexadecimal string of a Layer 3 message or mode report. Used for text-format logfile export only. | ||
MIMO Antenna Config, example '2x4' for 2 eNodeB and 4 UE antennas Argument: [1 ... 6] Serving cell index Chipset Vendors: Qualcomm, Samsung | ||
Mobility Management Entity Code. ► 3GPP 23.003, section 2.8.1 Range: 0 ... 255 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Mobility Management Entity Group ID. ► 3GPP 23.003, section 2.8.1 Range: 0 ... 65535 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Same as 'Mode (Num)' but in text format | ||
The radio technology 1 WCDMA 2 GSM 3 CDMA 4 EV-DO 7 LTE 9 LoRa 10 WiFi 11 NR Range: 1 ... 11 Chipset Vendors: OnDevice, Qualcomm, Ericsson, Samsung, TemsBasicRadio, HiSilicon, Neul, Intel | ✔ | |
The radio technology in text Chipset Vendors: OnDevice, Qualcomm, Ericsson, Samsung, TemsBasicRadio, HiSilicon, Neul, Intel | ✔ | |
1 No service 2 Idle mode 3 Dedicated (Connected) mode 4 Limited service mode 5 Scan mode 6 Packet mode 7 Packet idle mode (E-RRC mode) Range: 1 ... 7 | ||
General information about MR-DC information elements: Multi-RAT Dual Connectivity is the general term given to a range of different dual connectivity configuration options, largely associated with 5G. With MR-DC, the Master RAN Node functions as the controlling entity, utilizing a Secondary RAN for additional data capacity. MR-DC data radio bearer identity Argument: [1 ... 32] MR-DC DRB index Range: 1 ... 32 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
MR-DC data radio bearer PDCP type Argument: [1 ... 32] MR-DC DRB index Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Throughput on each PDCP downlink data radio bearer Argument: [1 ... 32] MR-DC DRB index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Throughput on each PDCP downlink data radio bearer Argument: [1 ... 32] MR-DC DRB index Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Total downlink throughput in the PDCP protocol layer (sum over all data radio bearers) Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Total downlink throughput in the PDCP protocol layer (sum over all data radio bearers) Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Throughput on each PDCP uplink data radio bearer Argument: [1 ... 32] MR-DC DRB index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Throughput on each PDCP uplink data radio bearer Argument: [1 ... 32] MR-DC DRB index Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Total uplink throughput in the PDCP protocol layer (sum over all data radio bearers) Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Total uplink throughput in the PDCP protocol layer (sum over all data radio bearers) Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
M-TMSI, MME-Temporary Mobile Subscriber Identity. ► 3GPP 23.003 Chipset Vendors: HiSilicon | ||
MR-DC mode, indicating radio technology and carrier configuration. Examples: LTE 3CA NR SA NR SA 2CA EN-DC 2LTE+1NR Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
NB access technology, can be one of: MTC, eMTC, NB-IoT Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
Range: 0 ... 16 Chipset Vendors: Qualcomm | ||
NB-IoT technology occupies a frequency band of 180 kHz bandwidth, which corresponds to one resource block in LTE transmission. Can be one of the following modes: Unknown Same PCI Using a resource block within the current LTE carrier. Inband Different PCI Using a resource block within another LTE carrier. Guard band Using an unused resource block within an LTE carrier's guard band. Standalone Using a currently used GSM frequency. Chipset Vendors: Qualcomm | ||
Narrowband subcarrier spacing for uplink, can be either 15 kHz or 3.75 kHz Chipset Vendors: Qualcomm | ||
General information about Neighbor Cell information elements: The argument points to an LTE cell. The sorting order depends on the setting in the General window: see UM section 'Sorting of Cells'. In case of carrier aggregation, these information elements encompass neighbors of all serving cells. Note, however, that all neighbors are reported and presented in the same way irrespective of which carrier they belong to. They are not explicitly identified as 'primary', 'secondary', etc. Received signal strength on the EARFCN each neighbor is using. Regarding EARFCN numbering, ► 3GPP 36.101. Argument: [1 ... 64] Neighbor index Unit: dBm Range: -140 ... 25 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Distance to each neighbor cell. Requires cell file and UE positioning data Argument: [1 ... 64] Neighbor index Unit: meter Range: 0 ... 100000 | ||
Downlink EARFCN of each neighbor. Regarding EARFCN numbering, ► 3GPP 36.101 Argument: [1 ... 64] Neighbor index Range: 0 ... 262143 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Neighbor Cell Frame Timing Offset Rx1 Neighbor Cell Frame Timing Offset Rx2 | Neighbor cell frame timing offset from serving cell as received on antenna Rx1/Rx2, i.e. 'Neighbor Cell Frame Timing Rx1/Rx2' – 'Serving Cell Frame Timing Rx1/Rx2' Argument: [1 ... 64] Neighbor index Range: -153599 ... 153600 Chipset Vendors: Qualcomm | |
Neighbor Cell Frame Timing Rx1 Neighbor Cell Frame Timing Rx2 | Neighbor cell frame timing relative to the network's absolute time reference, as received on antenna Rx1 Argument: [1 ... 64] Neighbor index Unit: LTE Ts unit Range: 0 ... 307199 Chipset Vendors: Qualcomm | ✔ |
Cell name of each neighbor. Requires cell file. Argument: [1 ... 64] Neighbor index | ||
Number of neighbors in the neighbor list of the current serving cell Range: 1 ... 64 | ||
Physical Cell Identity of each neighbor (NIDcell = 3 * NID1 + NID2). ► 3GPP 36.211, section 6.11 NIDcell: This is what we call 'PCI' NID1: This is what we call 'PCI (Group Part)' NID2: This is what we call 'PCI (Cell Part)' Argument: [1 ... 64] Neighbor index Range: 0 ... 503 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Argument: [1 ... 64] Neighbor index Range: 0 ... 2 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Argument: [1 ... 64] Neighbor index Range: 0 ... 167 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
RSRP of each neighbor, sum of contributions from all antennas Argument: [1 ... 64] Neighbor index Unit: dBm Range: -140 ... 25 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Neighbor Cell RSRP Tx1 Rx1 (dBm) Neighbor Cell RSRP Tx1 Rx2 (dBm) Neighbor Cell RSRP Tx1 Rx3 (dBm) Neighbor Cell RSRP Tx1 Rx4 (dBm) | RSRP contribution from eNodeB antenna Tx1 as received on antenna Rx1/Rx2/Rx3/Rx4 Argument: [1 ... 64] Neighbor index Unit: dBm Range: -140 ... 25 Chipset Vendors: Qualcomm, Samsung | |
RSRQ of each neighbor, sum of contributions from all UE antennas Argument: [1 ... 64] Neighbor index Unit: dBm Range: -40 ... 40 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Neighbor Cell RSRQ Tx1 Rx1 (dB) Neighbor Cell RSRQ Tx1 Rx2 (dB) Neighbor Cell RSRQ Tx1 Rx3 (dB) Neighbor Cell RSRQ Tx1 Rx4 (dB) | RSRQ contribution from eNodeB antenna Tx1 as received on antenna Rx1/Rx2/Rx3/Rx4 Argument: [1 ... 64] Neighbor index Unit: dBm Range: -40 ... 40 Chipset Vendors: Qualcomm, Samsung | |
This element is populated only for TEMS Pocket logfiles, taking the value 'Small Cell' for serving cells that have been identified in a transmitter file contained in an iBwave indoor map set, and 'Other Cell' otherwise Argument: [1 ... 64] Neighbor index Chipset Vendors: Common | ||
This element is populated only for TEMS Pocket logfiles, indicating which of the zones defined in an iBwave indoor map set each cell belongs to Argument: [1 ... 64] Neighbor index Chipset Vendors: Common | ||
Argument: [1 ... 100] Network search index Unit: MHz Range: 0 ... 1000 Chipset Vendors: PCTEL, RohdeSchwarz | ||
Argument: [1 ... 100] Network search index Chipset Vendors: PCTEL, RohdeSchwarz | ||
EARFCN to which each detected cell belongs Argument: [1 ... 100] Network search index Range: 0 ... 262143 Chipset Vendors: PCTEL, RohdeSchwarz | ||
Network search Mobile Country Code Argument: [1 ... 100] Network search index Range: 0 ... 999 Chipset Vendors: PCTEL, RohdeSchwarz | ||
Network search Mobile Network Code Argument: [1 ... 100] Network search index Range: 0 ... 999 Chipset Vendors: PCTEL, RohdeSchwarz | ||
Argument: [1 ... 100] Network search index Chipset Vendors: PCTEL, RohdeSchwarz | ||
Argument: [1 ... 100] Network search index Chipset Vendors: PCTEL, RohdeSchwarz | ||
Argument: [1 ... 100] Network search index Range: 0 ... 262143 Chipset Vendors: PCTEL, RohdeSchwarz | ||
Number of EARFCNs on which network activity (i.e. at least one cell) was detected Range: 0 ... 100 | ||
General information about Network Search information elements: 'Network Search' information elements are derived from network scanning. The argument, where present, points to an LTE cell found during the scan. PCI for each cell detected. ► 3GPP 36.211, section 6.11 Argument: [1 ... 100] Network search index Range: 0 ... 503 Chipset Vendors: PCTEL, RohdeSchwarz | ||
RSRP of each detected cell Argument: [1 ... 100] Network search index Unit: dBm Range: -140 ... 25 Chipset Vendors: PCTEL, RohdeSchwarz | ||
Range: 0 ... 16 Chipset Vendors: Qualcomm, Neul | ||
Range: 0 ... 16 Chipset Vendors: Qualcomm, Neul | ||
Count of ACKs for Narrowband Physical Downlink Shared Channel Range: 0 ... 2000 Chipset Vendors: Qualcomm, Neul | ||
Rate of ACKs for Narrowband Physical Downlink Shared Channel Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm, Neul | ||
Average of Subframe Count used by the Narrowband Physical Downlink Shared Channel Range: 0 ... 16 Chipset Vendors: Qualcomm, Neul | ||
Narrowband Physical Downlink Shared Channel block error rate Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm, Neul | ||
Narrowband Physical Downlink Shared Channel Modulation Coding Scheme snapshot Range: 0 ... 15 Chipset Vendors: Qualcomm, Neul | ||
Distribution of Modulation Coding Scheme usage on NPDSCH for primary serving cell Argument: [0 ... 15] MCS index Range: 0 ... 20 Chipset Vendors: Qualcomm, Neul | ||
Count of NACKs for Narrowband Physical Downlink Shared Channel Range: 0 ... 2000 Chipset Vendors: Qualcomm, Neul | ||
Rate of NACKs for Narrowband Physical Downlink Shared Channel Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm, Neul | ||
Narrowband Physical Downlink Shared Channel physical throughput Unit: kbit/s Range: 0 ... 34 Chipset Vendors: Qualcomm, Neul | ||
Average repetition number used by the Narrowband Physical Downlink Shared Channel Range: 0 ... 16 Chipset Vendors: Qualcomm, Neul | ||
Narrowband Physical Downlink Shared Channel average transport block size Range: 0 ... 680 Chipset Vendors: Qualcomm | ||
Count of ACKs for Narrowband Physical Uplink Shared Channel Range: 0 ... 2000 Chipset Vendors: Qualcomm, Neul | ||
Repetition number of Ack/Nack in SIB2 Argument: [0 ... 2] NPUSCH ack nack repetition zone index Range: 0 ... 128 Chipset Vendors: Common | ||
Rate of ACKs for Narrowband Physical Uplink Shared Channel Range: 0 ... 100 Chipset Vendors: Qualcomm, Neul | ||
Modulation Coding Scheme index for uplink transport block 0 Range: 0 ... 15 Chipset Vendors: Qualcomm, Neul | ||
Distribution of Modulation Coding Scheme usage on NPUSCH for primary serving cell Argument: [0 ... 15] MCS index Range: 0 ... 20 Chipset Vendors: Qualcomm, Neul | ||
Count of NACKs for Narrowband Physical Uplink Shared Channel Range: 0 ... 2000 Chipset Vendors: Qualcomm, Neul | ||
Rate of NACKs for Narrowband Physical Uplink Shared Channel Range: 0 ... 100 Chipset Vendors: Qualcomm, Neul | ||
Unit: kbit/s Range: 0 ... 66 Chipset Vendors: Qualcomm, Neul | ||
Average repetition number used by the Narrowband Physical Uplink Shared Channel Range: 1 ... 128 Chipset Vendors: Qualcomm, Neul | ||
Average of allocated Resource Unit (RU) on the NPUSCH Range: 1 ... 10 Chipset Vendors: Qualcomm, Neul | ||
Range: -50 ... 23 Chipset Vendors: Qualcomm | ||
Range: 0 ... 680 Chipset Vendors: Qualcomm, Neul | ||
Argument: [1 ... 16] NR neighbor index Range: 0 ... 63 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Argument: [1 ... 16] NR neighbor index Range: 123400 ... 2279165 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Physical Cell Identity for the NR neighbor Argument: [1 ... 16] NR neighbor index Range: 0 ... 1007 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Argument: [1 ... 16] NR neighbor index Unit: dBm Range: -150 ... -20 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Argument: [1 ... 16] NR neighbor index Unit: dB Range: -43 ... 20 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Argument: [1 ... 16] NR neighbor index Unit: dB Range: -30 ... 50 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Number of reported NR neighbors Range: 0 ... 16 | ||
Block Error Rate for Physical Broadcast Channel over the latest reporting period Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm | ||
Block Error Rate for Physical Broadcast Channel accumulated over the current session Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm | ||
The percentage of subframes encoded with a specific number of OFDM symbols during one second on the Physical Control Format Indicator Channel Argument: [1 ... 4] OFDM symbol count Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm, HiSilicon | ||
Number of Control Channel Elements sent on the PDCCH, accumulated over the current session. The update interval is configurable: see Options dialog. Argument: [1 ... 4] OFDM symbol count Range: 0 ... 1000000 Chipset Vendors: Qualcomm, HiSilicon | ||
Number of Control Channel Elements sent on the PDCCH during the latest reporting period Argument: [1 ... 4] OFDM symbol count Range: 0 ... 100 Chipset Vendors: Qualcomm, HiSilicon | ||
Distribution of Downlink Control Information format usage on PDCCH. Accumulated over the current session. DCI formats are detailed in ► 3GPP 36.212, section 5.3.3.1. The update interval is configurable: see section Options dialog. Argument: [1 ... 11] 1 Format 0 2 Format 1 3 Format 1A 4 Format 1B 5 Format 1C 6 Format 1D 7 Format 2 8 Format 2A 9 Format 2B 10 Format 3 11 Format 3A Range: 1 ... 65535 Chipset Vendors: Qualcomm, HiSilicon | ||
Distribution of Downlink Control Information format usage on PDCCH for the latest reporting period. DCI formats are detailed in ► 3GPP 36.212, section 5.3.3.1 Argument: [1 ... 11] 1 Format 0 2 Format 1 3 Format 1A 4 Format 1B 5 Format 1C 6 Format 1D 7 Format 2 8 Format 2A 9 Format 2B 10 Format 3 11 Format 3A Range: 1 ... 50 Chipset Vendors: Qualcomm, HiSilicon | ||
Number of downlink grants on PDCCH, accumulated over the current session. The update interval is configurable: see Options dialog. Range: 0 ... 1000000 Chipset Vendors: Qualcomm, HiSilicon | ||
Number of downlink grants on PDCCH during the latest reporting period Range: 0 ... 100 Chipset Vendors: Qualcomm, HiSilicon | ||
Number of uplink grants on PDCCH, accumulated over the current session. The update interval is configurable: Options dialog. Range: 0 ... 1000000 Chipset Vendors: Qualcomm, HiSilicon | ||
Number of uplink grants on PDCCH during the latest reporting period Range: 0 ... 100 Chipset Vendors: Qualcomm, HiSilicon | ||
Equipment timestamp of first PDCP packet received after a handover Unit: ms Range: 0 ... 86400000 Chipset Vendors: Qualcomm, HiSilicon | ||
Equipment timestamp of last PDCP packet received before a handover Unit: ms Range: 0 ... 86400000 Chipset Vendors: Qualcomm, HiSilicon | ||
Duration of downlink data transfer interruption at the PDCP layer in connection with a handover Unit: ms Range: 0 ... 1000 Chipset Vendors: Qualcomm, HiSilicon | ||
Distribution of PDCP downlink throughput over QoS Class Identifiers, each representing a different class of quality-of-service requirements. Argument: QCI value as defined in ► 3GPP 23.203, section 6.1.7.2. Conversational voice has QCI = 1, and conversational video has QCI = 2 Argument: [1 ... 9] QoS class identifier Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ||
Equipment timestamp of first PDCP packet transmitted after a handover Range: 0 ... 86400000 Chipset Vendors: Qualcomm, HiSilicon | ||
Equipment timestamp of last PDCP packet transmitted before a handover Range: 0 ... 86400000 Chipset Vendors: Qualcomm, HiSilicon | ||
Duration of uplink data transfer interruption at the PDCP layer in connection with a handover Range: 0 ... 1000 Chipset Vendors: Qualcomm, HiSilicon | ||
Distribution of PDCP uplink throughput over QoS Class Identifiers. Compare 'PDCP DL Throughput Per QCI (kbit/s)'. Argument: [1 ... 9] QCI value Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ||
Address type: IPv4 or IPv6 Argument: [1 ... 9] PDN connection index Chipset Vendors: Common | ✔ | |
Aggregate Maximum Bit Rate on downlink. ► 3GPP 24.301, section 9.9.4.2 Argument: [1 ... 9] PDN connection index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Common | ✔ | |
Aggregate Maximum Bit Rate on uplink. ► 3GPP 24.301, section 9.9.4.2 Argument: [1 ... 9] PDN connection index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Common | ✔ | |
Host name or network Access Point Name Argument: [1 ... 9] PDN connection index Chipset Vendors: Common | ✔ | |
EPS Default Bearer associated with each PDN connection Argument: [1 ... 9] PDN connection index Range: 5 ... 15 Chipset Vendors: Common | ✔ | |
Argument: [1 ... 9] PDN connection index Range: 0 ... 8 Chipset Vendors: Common | ✔ | |
User address (IPv4) Argument: [1 ... 9] PDN connection index Chipset Vendors: Common | ✔ | |
User address (IPv6) Interface Identifier Argument: [1 ... 9] PDN connection index Chipset Vendors: Common | ✔ | |
Number of active PDN connections Range: 1 ... 9 | ||
General information about PDSCH information elements: PDSCH information elements concern the Physical Downlink Shared Channel. General information about PDSCH BLER information elements: The block error rate is calculated simply as the percentage of failed transmission attempts, each attempt being regarded in isolation and no attention being paid to its sequence number. Note that 'PDSCH Initial BLER TB0' and 'PDSCH Residual BLER TB0' are different. These elements are valid for the latest reporting period. Block Error Rate on the PDSCH Argument: [1 ... 6] Serving cell index Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
PDSCH BLER TB1 (%) | Block Error Rate for downlink Transport Block 0/1 Argument: [1 ... 6] Serving cell index Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm, Samsung, HiSilicon | |
PDSCH BLER TB1 Ack Number Of | Number of ACKs for downlink Transport Block 0/1 Argument: [1 ... 6] Serving cell index Range: 0 ... 75 Chipset Vendors: Qualcomm, Samsung, HiSilicon | |
PDSCH BLER TB1 Nack Number Of | Number of NACKs for downlink Transport Block 0/1 Argument: [1 ... 6] Serving cell index Range: 0 ... 75 Chipset Vendors: Qualcomm, Samsung, HiSilicon | |
PDSCH Initial BLER TB1 (%) | Percentage of failed first attempts to transmit PDSCH transport block, no further attempts being considered. Updated every second. Argument: [1 ... 6] Serving cell index Unit: % Range: 0 ... 100 Chipset Vendors: Common | |
PDSCH MCS Distribution PCell TB0 PDSCH MCS Distribution PCell TB1 | Distribution of modulation coding scheme usage on PDSCH for primary serving cell and Transport Block 0/1. Updated every second. Argument: [0 ... 31] MCS index Range: 0 ... 1000 Chipset Vendors: Qualcomm, HiSilicon, Intel | |
PDSCH MCS Distribution SCell1 TB0 PDSCH MCS Distribution SCell1 TB1 ... PDSCH MCS Distribution SCell5 TB1 | Distribution of modulation coding scheme usage on PDSCH for nth secondary serving cell and Transport Block 0/1. Updated every second. Argument: [0 ... 31] MCS index Range: 0 ... 1000 Chipset Vendors: Qualcomm, HiSilicon, Intel | |
PDSCH MCS1 | Modulation Coding Scheme index for downlink transport block 0/1, snapshot value. ► 3GPP 36.213, section 7.1.7.1 Argument: [1 ... 6] Serving cell index Range: 0 ... 31 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ |
PDSCH Modulation Distribution PCell TB0 PDSCH Modulation Distribution PCell TB1 | Distribution of modulation usage for primary serving cell and downlink Transport Block 0/1. Updated every second. Detailed Argument Description: 1 QPSK 2 16-QAM 3 64-QAM 4 256-QAM Argument: [1 ... 4] Modulation index Range: 0 ... 1000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | |
PDSCH Modulation Distribution SCell1 TB0 PDSCH Modulation Distribution SCell1 TB1 ... PDSCH Modulation Distribution SCell5 TB1 | Distribution of modulation usage for nth secondary serving cell and downlink Transport Block 0/1. Updated every second. Detailed Argument Description: 1 QPSK 2 16-QAM 3 64-QAM 4 256-QAM Argument: [1 ... 4] Modulation index Range: 0 ... 1000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | |
PDSCH Modulation TB1 (bits) | The number of bits used for modulation of downlink Transport Block 0/1. ► 3GPP 36.213, section 7.1.7.1 Argument: [1 ... 6] Serving cell index Range: 0 ... 8 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ |
PDSCH Modulation TB1 (text) | Name of modulation method used for modulation of downlink Transport Block 0/1 Argument: [1 ... 6] Serving cell index Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ |
Number of used downlink transport blocks Argument: [1 ... 6] Serving cell index Range: 0 ... 2 Chipset Vendors: Common | ||
Total throughput on the PDSCH, measured as the throughput rate from the physical layer to the MAC layer. Sum taken over all carriers in case of carrier aggregation (CA) Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Total throughput on the PDSCH, measured as the throughput rate from the physical layer to the MAC layer. Sum taken over all carriers in case of carrier aggregation (CA) Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
PDSCH Phy Throughput CW0 (kbit/s) PDSCH Phy Throughput CW1 (kbit/s) | Throughput on the PDSCH for Code Word 0/1 Argument: [1 ... 6] Serving cell index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, HiSilicon | |
PDSCH Phy Throughput CW0 (Mbit/s) PDSCH Phy Throughput CW1 (Mbit/s) | Throughput on the PDSCH for Code Word 0/1 Argument: [1 ... 6] Serving cell index Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, HiSilicon | |
Total throughput on the PDSCH for each carrier in use Argument: [1 ... 6] Serving cell index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Total throughput on the PDSCH for each carrier in use Argument: [1 ... 6] Serving cell index Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Argument: [1 ... 6] Serving cell index Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
PDSCH Residual BLER TB1 (%) | Percentage of PDSCH transport blocks that were not transmitted successfully even after the maximum number of attempts. Updated every second. Argument: [1 ... 6] Serving cell index Unit: % Range: 0 ... 100 Chipset Vendors: Common | |
Number of PDSCH resource blocks, equal to N_PRB in ► 3GPP 36.213, section 7.1.7 Argument: [1 ... 6] Serving cell index Range: 1 ... 110 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Percentage of the maximum number of PDSCH resource blocks, equal to N_PRB in ► 3GPP 36.213, section 7.1.7 Argument: [1 ... 6] Serving cell index Range: 0 ... 100 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Number of PDSCH resource blocks allocated over the past second Argument: [1 ... 6] Serving cell index Range: 0 ... 100000 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Within the current TTI, index of the first PDSCH resource block that is allocated to this device Argument: [1 ... 6] Serving cell index Range: 0 ... 100 Chipset Vendors: Qualcomm, HiSilicon | ✔ | |
Signal to Interference-plus-Noise Ratio on the PDSCH. Calculated as: Serving cell SINR + PA value + ('eNodeB Antenna Count' – 1) * 3, where 'PA value' comes from the physicalConfigDedicated field signalled over RRC. Argument: [1 ... 6] Serving cell index Unit: dB Range: -40 ... 60 Chipset Vendors: Qualcomm, Samsung | ||
PDSCH Transmission Distribution CW0 (Accu) % PDSCH Transmission Distribution CW1 (Accu) % | Distribution of the number of attempts required to successfully transmit a downlink Code Word 0/1. Accumulated over the current session. The information element is for primary carrier. Detailed Argument Description: 0 Residual: all permitted transmission attempts failed 1 Success at first attempt 2 ... 7 Success at 2nd ... 7th attempt (= 1st ... 6th retransmission) 8 Success at 8th or later attempt (= 7th or later retransmission) Argument: [0 ... 8] PDSCH transmission index Unit: % Range: 0 ... 100 Chipset Vendors: Common | |
PDSCH Transmission Distribution CW0 (Accu) Count PDSCH Transmission Distribution CW1 (Accu) Count | Same as 'PDSCH Transmission Distribution CW(0/1) (Accu) %' but expressing the distribution in terms of absolute numbers rather than percentages Argument: [0 ... 8] PDSCH transmission index Range: 0 ... 1000000 Chipset Vendors: Common | |
PDSCH Transmission Distribution CW0 (Curr) % PDSCH Transmission Distribution CW1 (Curr) % | Distribution of the number of attempts required to successfully transmit a downlink Code Word 0/1. Valid for latest reporting period. Argument: See 'PDSCH Transmission Distribution CW0 (Accu) (%)' Argument: [0 ... 8] PDSCH transmission index Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm, HiSilicon | |
PDSCH Transmission Distribution CW0 (Curr) Count PDSCH Transmission Distribution CW1 (Curr) Count | Same as 'PDSCH Transmission Distribution CW0 (Curr) (%)' but expressing the distribution in terms of absolute numbers rather than percentages Argument: [0 ... 8] PDSCH transmission index Range: 0 ... 100 Chipset Vendors: Qualcomm, HiSilicon | |
Number of non-empty TTIs (i.e. ones where data as been sent) on the PDSCH during the latest second. Updated every second. Argument: [1 ... 6] Serving cell index Range: 0 ... 1000 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
eMBMS: Percentage of PMCH transport blocks that were successfully decoded (CRC pass). Updated every second. Range: 0 ... 100 Chipset Vendors: Qualcomm, Samsung | ✔ | |
eMBMS: Number of PMCH transport blocks received over the past second Range: 0 ... 1000 Chipset Vendors: Qualcomm, Samsung | ✔ | |
Precoding Matrix Indicator: actual value used Argument: [1 ... 6] Serving cell index Range: 0 ... 15 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
PMI reported by the UE to the eNodeB Argument: [1 ... 6] Serving cell index Range: 0 ... 15 Chipset Vendors: Qualcomm | ||
Indicates how much transmission power left for a UE to use in addition to the power being used by current transmission Range: -40 ... 40 Chipset Vendors: Qualcomm | ||
Chipset Vendors: Qualcomm | ✔ | |
E-UTRA Access Stratum release supported by UE: 'Rel-8', 'Rel-9', etc. ► 3GPP 36.306, section 4.3.8.1 Chipset Vendors: Common | ||
General information about PSS Peak information elements: PSS Peak information elements relate to the Primary Synchronization Signal. Number of PSS peaks found Range: 0 ... 16 | ||
Position of PSS peak, expressed as a multiple of 5 ms Argument: [1 ... 16] PSS peak index Range: 0 ... 48000 Chipset Vendors: Qualcomm | ||
Power of PSS peak, expressed as a value in decibel Argument: [1 ... 16] PSS peak index Unit: dB Range: -21 ... 27 Chipset Vendors: Qualcomm | ||
Current power control adjustment state for Physical Uplink Control Channel. ► 3GPP 36.213, section 5.1.2.1 Range: -10 ... 10 Chipset Vendors: Qualcomm, HiSilicon | ||
Path loss weighting factor in PUSCH power control equation. ► 3GPP 36.213, section 5.1.1.1 Range: 0 ... 1 Chipset Vendors: Qualcomm, HiSilicon | ||
General information about PUSCH BLER information elements: PUSCH BLER information elements, the block error rate is calculated simply as the percentage of failed transmission attempts, each attempt being regarded in isolation and no attention being paid to its sequence number. Note that 'PUSCH Initial BLER (%)' and 'PUSCH Residual BLER' are different. These elements are valid for the latest reporting period. Block Error Rate on the PUSCH Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ||
Number of ACKs for uplink transport blocks Range: 0 ... 75 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ||
Number of NACKs for uplink transport blocks Range: 0 ... 75 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ||
Current PUSCH power control adjustment state. ► 3GPP 36.213, section 5.1.1.1 ('fc(i)') Range: -10 ... 10 Chipset Vendors: Qualcomm, HiSilicon | ||
Maximum number of HARQ transmissions Range: 0 ... 1 Chipset Vendors: Qualcomm, HiSilicon | ||
Percentage of failed first attempts to transmit PUSCH transport blocks, no further attempts being considered. Updated every second. Range: 0 ... 100 Chipset Vendors: Common | ||
Modulation Coding Scheme index for the uplink transport block. ► 3GPP 36.213, section 7.1.7.1 Range: 0 ... 31 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Distribution of modulation coding scheme usage on the PUSCH. Updated every second. Argument: [0 ... 31] MCS index Range: 0 ... 1000 Chipset Vendors: Qualcomm, HiSilicon, Intel | ||
The number of bits used for modulation of the uplink transport block. ► 3GPP 36.213, section 7.1.7.1 Range: 0 ... 6 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Name of modulation method used for modulation of the uplink transport block Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
PO_NOMINAL_PUSCH for current serving cell. ► 3GPP 36.213, section 5.1.1.1 Unit: dBm Range: -126 ... 24 Chipset Vendors: Qualcomm, HiSilicon | ||
Throughput on the PUSCH. Sum taken over all carriers in case of carrier aggregation (CA) Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Common | ✔ | |
Throughput on the PUSCH. Sum taken over all carriers in case of carrier aggregation (CA) Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Common | ✔ | |
Total throughput on the PUSCH for each carrier in use Argument: [1 ... 6] Serving cell index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Total throughput on the PUSCH for each carrier in use Argument: [1 ... 6] Serving cell index Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Percentage of PUSCH transport blocks that were not transmitted successfully even after the maximum number of attempts. Updated every second. Range: 0 ... 100 Chipset Vendors: Common | ||
Number of PUSCH resource blocks, equal to N_PRB in ► 3GPP 36.213, section 8.1. Argument: [1 ... 6] Serving cell index Range: 1 ... 110 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Percentage of the maximum number of PUSCH resource blocks, equal to N_PRB in ► 3GPP 36.213, section 8.6.2 Argument: [1 ... 6] Serving cell index Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Number of PUSCH resource blocks allocated over the past second Range: 0 ... 100000 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Within the current TTI, index of the first PUSCH resource block that is allocated to this device Argument: [1 ... 6] Serving cell index Range: 0 ... 100 Chipset Vendors: Qualcomm, HiSilicon | ✔ | |
Distribution of the number of attempts required to successfully transmit an uplink transport block. Accumulated over the current session, presented as %. Detailed Argument Description: 0 Residual: all permitted transmission attempts failed 1 Success at first attempt 2 ... 5 Success at 2nd ... 5th attempt (= 1st ... 4th retransmission) 6 Success at 6th or later attempt (= 5th or later retransmission) Argument: [0 ... 6] PUSCH transmission index Unit: % Range: 0 ... 100 Chipset Vendors: Common | ||
Distribution of the number of attempts required to successfully transmit an uplink transport block. Accumulated over the current session, presented as absolute block counts. Detailed Argument Description: 0 Residual: all permitted transmission attempts failed 1 Success at first attempt 2 ... 5 Success at 2nd ... 5th attempt (= 1st ... 4th retransmission) 6 Success at 6th or later attempt (= 5th or later retransmission) Argument: [0 ... 6] PUSCH transmission index Range: 0 ... 1000000 Chipset Vendors: Common | ||
Distribution of the number of attempts required to successfully transmit an uplink transport block. Valid for latest reporting period, presented as %. Detailed Argument Description: 0 Residual: all permitted transmission attempts failed 1 Success at first attempt 2 ... 5 Success at 2nd ... 5th attempt (= 1st ... 4th retransmission) 6 Success at 6th or later attempt (= 5th or later retransmission) Argument: [0 ... 6] PUSCH transmission index Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm, HiSilicon | ||
Distribution of the number of attempts required to successfully transmit an uplink transport block. Valid for latest reporting period, presented as absolute block counts. Detailed Argument Description: 0 Residual: all permitted transmission attempts failed 1 Success at first attempt 2 ... 5 Success at 2nd ... 5th attempt (= 1st ... 4th retransmission) 6 Success at 6th or later attempt (= 5th or later retransmission) Argument: [0 ... 6] PUSCH transmission index Range: 0 ... 100 Chipset Vendors: Qualcomm, HiSilicon | ||
Range: -6 ... 8 Chipset Vendors: Qualcomm | ||
Number of non-empty TTIs (i.e. ones where data as been sent) on the PUSCH during the latest second. Updated every second. Argument: [1 ... 6] Serving cell index Range: 0 ... 1000 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Specifies the number of consecutive subframes during which the UE shall monitor the PDCCH after a RACH-related message of type 'Msg3' is transmitted. ► 3GPP 36.321, section 5.1.5 Range: 8 ... 64 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
Status of RACH contention resolution timer. 0: Idle 1: Running 2: Timed out Range: 0 ... 2 Chipset Vendors: HiSilicon, Neul | ||
Same as 'RACH Contention Resolution Timer Status (Num)' but in text format Chipset Vendors: HiSilicon, Neul | ||
Transmit power of last RACH preamble Unit: dBm Range: -50 ... 30 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
Transmit power of first RACH preamble Unit: dBm Range: -50 ... 30 Chipset Vendors: Qualcomm, HiSilicon | ✔ | |
Time between request and response, measured in TTIs Range: 0 ... 32000 Chipset Vendors: Qualcomm, Neul | ✔ | |
Maximum transmit power of RACH preamble Unit: dBm Range: -50 ... 23 Chipset Vendors: Common | ||
Maximum number of preambles in one preamble ramping cycle Range: 3 ... 200 Chipset Vendors: Qualcomm, HiSilicon, Neul | ✔ | |
Range: 0 ... 7 Chipset Vendors: Qualcomm, Neul | ||
Retransmission count for each RACH Msg 1 Range: 0 ... 128 Chipset Vendors: Qualcomm | ||
Retransmission count for each RACH Msg 3 Range: 0 ... 128 Chipset Vendors: Qualcomm | ||
Range: 0 ... 7 Chipset Vendors: Qualcomm | ✔ | |
Range: -50 ... 23 Chipset Vendors: Qualcomm, Neul | ||
Number of transmits required for the last random access procedure Range: 0 ... 255 Chipset Vendors: Qualcomm, HiSilicon, Neul, Intel | ✔ | |
Window size for Random Access Response Chipset Vendors: Qualcomm, HiSilicon | ||
Number of RACH preamble responses with indication of PUSCH resource Range: 0 ... 255 Chipset Vendors: Qualcomm | ||
RACH preamble power step size in dB Unit: dB Range: 0 ... 255 Chipset Vendors: Qualcomm, HiSilicon | ✔ | |
Reason for random access procedure, one of: 'Connection Request', 'Radio Link Failure', 'Uplink Data Arrival', 'Downlink Data Arrival', 'Handover' Chipset Vendors: Qualcomm, Neul | ✔ | |
Outcome of random access procedure, e.g.: 'Success', 'Failure at <message, reason>', 'Aborted' Chipset Vendors: Qualcomm, Neul, Intel | ✔ | |
Random access Radio Network Temporary Identity (RA-RNTI) Range: 0 ... 65535 Chipset Vendors: Qualcomm, HiSilicon, Intel | ||
UE identifier used for contention resolution in random access procedure. ► 3GPP 36.300, section 10.1.6 Range: 0 ... 63 Chipset Vendors: Qualcomm, HiSilicon | ||
Type of random access procedure: 'Contention free' or 'Contention based'. ► 3GPP 36.300, section 10.1.5 Chipset Vendors: Qualcomm, HiSilicon, Neul | ✔ | |
Rank Indication: actual value used. ► 3GPP 36.212 Argument: [1 ... 6] Serving cell index Range: 1 ... 4 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Number of times the 'RI Feedback' element has had the value 1, accumulated over the current session Argument: [1 ... 6] Serving cell index Range: 0 ... 65535 Chipset Vendors: Qualcomm | ✔ | |
Number of times the 'RI' element has had the value 1, accumulated over the current session. The update interval is configurable: see Options dialog. Argument: [1 ... 6] Serving cell index Range: 0 ... 65535 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Number of times the 'RI Feedback' element has had the value 2, accumulated over the current session Argument: [1 ... 6] Serving cell index Range: 0 ... 65535 Chipset Vendors: Qualcomm | ✔ | |
Number of times the 'RI' element has had the value 2, accumulated over the current session. The update interval is configurable: see Options dialog. Argument: [1 ... 6] Serving cell index Range: 0 ... 65535 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Rank Indication reported by the UE to the eNodeB Argument: [1 ... 6] Serving cell index Range: 1 ... 4 Chipset Vendors: Qualcomm | ✔ | |
LTE RLC DL DRB Throughput Argument: [1 ... 32] MR-DC DRB index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung | ✔ | |
LTE RLC DL DRB Throughput Argument: [1 ... 32] MR-DC DRB index Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, Samsung | ✔ | |
General information about RLC information elements with argument: The argument, where present, refers to an individual RLC radio bearer (RLC RB Index) Equipment timestamp of first RLC packet received after a handover. Unit: ms Range: 0 ... 86400000 Chipset Vendors: Qualcomm, HiSilicon | ||
Equipment timestamp of last RLC packet received before a handover Unit: ms Range: 0 ... 86400000 Chipset Vendors: Qualcomm, HiSilicon | ||
Duration of downlink data transfer interruption at the RLC layer in connection with a handover Unit: ms Range: 0 ... 1000 Chipset Vendors: Qualcomm, HiSilicon | ||
Identity of each RLC downlink radio bearer Argument: [1 ... 38] RLC RB index Chipset Vendors: Qualcomm, Samsung, HiSilicon | ||
RLC downlink radio bearer mode, one of: 'AM' = Acknowledged Mode 'TM' = Transparent Mode 'UM' = Unacknowledged Mode Argument: [1 ... 38] RLC RB index Chipset Vendors: Qualcomm, Samsung, HiSilicon | ||
Number of RLC downlink radio bearers Range: 1 ... 38 | ||
Throughput on each RLC downlink radio bearer Argument: [1 ... 38] RLC RB index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung | ||
Total RLC downlink throughput for all radio bearers Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul | ✔ | |
Total RLC downlink throughput for all radio bearers Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul | ✔ | |
Range: 0 ... 1000000000 Chipset Vendors: Qualcomm | ||
Range: 0 ... 1000000000 Chipset Vendors: Qualcomm | ||
LTE RLC UL DRB Throughput Argument: [1 ... 32] MR-DC DRB index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung | ✔ | |
LTE RLC UL DRB Throughput Argument: [1 ... 32] MR-DC DRB index Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, Samsung | ✔ | |
Equipment timestamp of first RLC packet transmitted after a handover Unit: ms Range: 0 ... 86400000 Chipset Vendors: Qualcomm, HiSilicon | ||
Equipment timestamp of last RLC packet transmitted before a handover Unit: ms Range: 0 ... 86400000 Chipset Vendors: Qualcomm, HiSilicon | ||
Duration of uplink data transfer interruption at the RLC layer in connection with a handover Unit: ms Range: 0 ... 1000 Chipset Vendors: Qualcomm, HiSilicon | ||
Identity of each RLC uplink radio bearer Argument: [1 ... 38] RLC RB index Chipset Vendors: Qualcomm, Samsung, HiSilicon | ||
RLC uplink radio bearer mode. One of: 'AM' = Acknowledged Mode 'TM' = Transparent Mode 'UM' = Unacknowledged Mode Argument: [1 ... 38] RLC RB index Chipset Vendors: Qualcomm, Samsung, HiSilicon | ||
Number of RLC uplink radio bearers Range: 1 ... 38 | ||
Throughput on each RLC uplink radio bearer Argument: [1 ... 38] RLC RB index Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung | ||
Total RLC uplink throughput for all radio bearers. Available in kbit/s and Mbit/s versions Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul | ✔ | |
Total RLC uplink throughput for all radio bearers. Available in kbit/s and Mbit/s versions Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul | ✔ | |
Device NAS status. One of: 'Home', 'Roaming', 'Not Registered' Chipset Vendors: Qualcomm, Samsung, HiSilicon | ||
RRC state: 'Idle', 'Connected', or 'Inactive' Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
Sc 2nd Bandwidth ... Sc 12th Bandwidth | General information about Sc Nth information elements: N represents the scanned EARFCN. For some IEs N is between 1 and 4, and for other IEs between 1 and 12. These elements derive from LTE scanning. Argument Description: Refers to an LTE cell. The sorting order within each element depends on the setting in the General window: see UM section 'Sorting of Cells'. Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd BCH RSSI (dBm) Sc 3rd BCH RSSI (dBm) Sc 4th BCH RSSI (dBm) | BCH RSSI for each cell scanned Note only for Freqs 1-4 Argument: [0 ... 504] Scanned index Unit: dBm Range: -140 ... 25 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd Cell Distance (m) ... Sc 12th Cell Distance (m) | Distance from scanning device to each cell scanned. Requires cell file and GPS positioning data for the scanning device. Argument: [0 ... 504] Scanned index Unit: meter Range: 0 ... 100000 | |
Sc 2nd Cell Macro Ingress Sc 3rd Cell Macro Ingress Sc 4th Cell Macro Ingress | This element is populated only for TEMS Pocket logfiles. It indicates the difference between the total RSRP of small (indoor) cells and the total RSRP of macro (outdoor) cells on this EARFCN. Small cells have been identified as such in a transmitter file contained in an iBwave indoor map set. The RSRP sums are taken in the mW domain. Note only for Freqs 1-4 Unit: dB Range: -140 ... 140 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd Cell Name ... Sc 12th Cell Name | Name of each cell. Requires cell file. Argument: [0 ... 504] Scanned index | |
Sc 1st Cell Small Cell Indication Sc 2nd Cell Small Cell Indication Sc 3rd Cell Small Cell Indication Sc 4th Cell Small Cell Indication | This element is populated only for TEMS Pocket logfiles, taking the value 'Small Cell' for cells that have been identified in a transmitter file contained in an iBwave indoor map set, and 'Other Cell' otherwise. Note only for Freqs 1-4 Argument: [0 ... 504] Scanned index Chipset Vendors: Common | ✔ |
Sc 2nd Cell Zone Sc 3rd Cell Zone Sc 4th Cell Zone | This element is populated only for TEMS Pocket logfiles, indicating which of the zones defined in an iBwave indoor map set each cell belongs to. Note only for Freqs 1-4 Argument: [0 ... 504] Scanned index Chipset Vendors: Common | ✔ |
Sc 2nd CFO (Hz) ... Sc 12th CFO (Hz) | Center frequency offset of each cell scanned Argument: [0 ... 504] Scanned index Unit: hertz Range: -10000 ... 10000 Chipset Vendors: RohdeSchwarz | ✔ |
Sc 1st Channel Matrix Noise Power (dBm) Sc 2nd Channel Matrix Noise Power (dBm) ... Sc 12th Channel Matrix Noise Power (dBm) | Noise power (average) of channel matrix for each cell scanned in dBm Argument: [0 ... 504] Scanned index Unit: dBm Range: -150 ... -20 Chipset Vendors: PCTEL | ✔ |
Sc 2nd Channel RSSI (dBm) ... Sc 12th Channel RSSI (dBm) | The power in the entire LTE channel bandwidth Unit: dBm Range: -140 ... 25 Chipset Vendors: PCTEL | ✔ |
Sc 2nd Channel Type ... Sc 12th Channel Type | Channel type is one of FDD, TDD, LAA, NB-IOT, UNKNOWN Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd Delay Spread (samples) Sc 3rd Delay Spread (samples) Sc 4th Delay Spread (samples) | Delay spread, expressed as a number of sample times Ts, for each cell scanned. Ts is the shortest time interval defined in the LTE system, equal to 1 / (30.72 MHz) or 32.552 ns. Note only for Freqs 1-4 Argument: [0 ... 504] Scanned index Range: 0 ... 1023 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd Duplex Mode ... Sc 12th Duplex Mode | Scanner duplex mode indication (FDD/TDD) Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd EARFCN ... Sc 24th EARFCN | EARFCN of each cell scanned Range: 0 ... 262143 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd MCC ... Sc 12th MCC | Mobile country code of each cell scanned Argument: [0 ... 504] Scanned index Range: 0 ... 999 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 1st MIMO Condition Number (dB) Sc 2nd MIMO Condition Number (dB) ... Sc 12th MIMO Condition Number (dB) | Condition number of the channel matrix in a 2x2 MIMO configuration (2 Tx, 2 Rx) for each cell scanned. The condition number is a measure of the orthogonality of the MIMO streams, and hence an indication of whether the MIMO channel is currently capable of supporting spatial multiplexing. The lower the condition number, the better. Argument: [0 ... 504] Scanned index Unit: dB Range: 0 ... 50 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd MIMO Estimated Rank ... Sc 12th MIMO Estimated Rank | The estimated rank of the channel matrix in a 2x2 MIMO configuration (2 Tx, 2 Rx) for each cell scanned. Rank estimates are computed for both open-loop and closed-loop MIMO, and the better estimate is presented. Argument: [0 ... 504] Scanned index Range: 1 ... 4 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 1st MIMO Estimated Rank Type Sc 2nd MIMO Estimated Rank Type ... Sc 12th MIMO Estimated Rank Type | Type of MIMO that has the best estimated rank: 'OL': Open-loop 'CL': Closed-loop 'OL + CL': Open-loop and closed-loop have equal rank Argument: [0 ... 504] Scanned index Chipset Vendors: PCTEL | |
Sc 1st MIMO Layer 1 Estimated CQI Sc 1st MIMO Layer 2 Estimated CQI ... Sc 12th MIMO Layer 4 Estimated CQI | Estimated Channel Quality Indicator. Indication of overall channel efficiency. Calculated for each MIMO transmission scheme and layer. Available for both wideband and individual subbands. Argument: [0 ... 504] Scanned index Range: 0 ... 15 Chipset Vendors: PCTEL | |
Sc 1st MIMO Layer 1 Estimated Throughput (Kbit/s) Sc 1st MIMO Layer 2 Estimated Throughput (Kbit/s) ... Sc 12th MIMO Layer 4 Estimated Throughput (Kbit/s) | Estimation of overall wideband channel throughput, given channel conditions, bandwidth, and typical overhead. Calculated for each MIMO transmission scheme and layer. Argument: [0 ... 504] Scanned index Unit: kbit/s Range: 0 ... 10000000 Chipset Vendors: PCTEL | |
Sc 1st MIMO Layer 1 Estimated Throughput (Mbit/s) Sc 1st MIMO Layer 2 Estimated Throughput (Mbit/s) ... Sc 12th MIMO Layer 4 Estimated Throughput (Mbit/s) | Estimation of overall wideband channel throughput, given channel conditions, bandwidth, and typical overhead. Calculated for each MIMO transmission scheme and layer. Argument: [0 ... 504] Scanned index Unit: Mbit/s Range: 0 ... 10000 Chipset Vendors: PCTEL | |
Sc 2nd MNC ... Sc 12th MNC | Mobile network code of each cell scanned Argument: [0 ... 504] Scanned index Range: 0 ... 999 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd NB-IOT Operation Mode ... Sc 12th NB-IOT Operation Mode | Operation Mode of each NB-IoT cell scanned. Can be one of the following modes: In-band Using a resource block within LTE carrier. Guard-band Using an unused resource block within an LTE carrier's guard band. Standalone Using a currently used GSM frequency. Chipset Vendors: PCTEL | ✔ |
Sc 2nd No Of Cell Identities ... Sc 12th No Of Cell Identities | Total number of detected PCIs on this EARFCN Range: 0 ... 504 | |
Sc 2nd No Of Rx Antennas ... Sc 12th No Of Rx Antennas | The number of scanner Rx antennas used in scanning this EARFCN Range: 0 ... 4 Chipset Vendors: PCTEL, RohdeSchwarz | |
Sc 2nd No Of Tx Antennas ... Sc 12th No Of Tx Antennas | Number of Tx ports for each cell/EARFCN scanned Argument: [0 ... 504] Scanned index Range: 0 ... 4 Chipset Vendors: PCTEL, RohdeSchwarz | |
Sc 2nd PCI ... Sc 12th PCI | PCI for each cell scanned Argument: [0 ... 504] Scanned index Range: 0 ... 503 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd P-SCH RP (dBm) Sc 3rd P-SCH RP (dBm) Sc 4th P-SCH RP (dBm) | P-SCH Received Power for each cell scanned Argument: [0 ... 504] Scanned index Unit: dBm Range: -140 ... 25 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd PSS CINR (dB) ... Sc 12th PSS CINR (dB) | Primary Synchronization Signal CINR for each Nb-IoT/LTE-LAA cell scanned Argument: [0 ... 504] Scanned index Unit: dB Range: -40 ... 60 Chipset Vendors: PCTEL | ✔ |
Sc 2nd PSS RP (dBm) ... Sc 12th PSS RP (dBm) | Primary Synchronization Signal Received Power for each NB-IoT/LTE-LAA cell scanned Argument: [0 ... 504] Scanned index Unit: dBm Range: -140 ... 25 Chipset Vendors: PCTEL | ✔ |
Sc 2nd PSS RQ (dB) ... Sc 12th PSS RQ (dB) | Primary Synchronization Signal Received Quality for each NB-IoT/LTE-LAA cell scanned Argument: [0 ... 504] Scanned index Unit: dB Range: -40 ... 40 Chipset Vendors: PCTEL | ✔ |
Sc 2nd RRC Cell Identity ... Sc 12th RRC Cell Identity | ECI, E-UTRAN Cell Identifier, of each cell scanned, expressed in decimal format. ► 3GPP 36.300, section 8.2 Argument: [0 ... 504] Scanned index Range: 0 ... 268435456 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd RS CINR (dB) ... Sc 12th RS CINR (dB) | Reference Signal CINR for each cell scanned Argument: [0 ... 504] Scanned index Unit: dB Range: -40 ... 60 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 1st RS CINR Rx1 Tx2 (dB) ... Sc 12th RS CINR Rx4 Tx4 (dB) | Reference Signal CINR for Tx port as received on Rx antenna, for each cell scanned Argument: [0 ... 504] Scanned index Unit: dB Range: -40 ... 60 Chipset Vendors: PCTEL | ✔ |
Sc 2nd RSRP (dBm) ... Sc 12th RSRP (dBm) | RSRP (sum total over all Tx ports) for each cell scanned Argument: [0 ... 504] Scanned index Unit: dBm Range: -140 ... 25 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 1st RSRP Rx1 Tx2 (dBm) ... Sc 4th RSRP Rx4 Tx4 (dBm) | RSRP for Tx port j (j = 1 ... 4) as received on Rx antenna i (i = 1 ... 4), for each cell scanned. Argument: [0 ... 504] Scanned index Unit: dBm Range: -140 ... 25 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd RSRQ (dB) ... Sc 12th RSRQ (dB) | RSRQ (sum total over all Tx ports) for each cell scanned Argument: [0 ... 504] Scanned index Unit: dB Range: -40 ... 40 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 1st RSRQ Rx1 Tx2 (dB) ... Sc 4th RSRQ Rx4 Tx4 (dB) | RSRQ for Tx port j (j = 1 ... 4) as received on Rx antenna i (i = 1 ... 4), for each cell scanned. Argument: [0 ... 504] Scanned index Unit: dB Range: -40 ... 40 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd SCH CINR (dB) ... Sc 12th SCH CINR (dB) | PCTel P-SCH CINR for each cell scanned. R&S S-SCH CINR for each cell scanned. Argument: [0 ... 504] Scanned index Unit: dB Range: -40 ... 60 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd SCH RQ (dB) ... Sc 12th SCH RQ (dB) | PCTel: P-SCH received quality for each cell scanned. R&S: S-SCH Received Quality for each cell scanned. Argument: [0 ... 504] Scanned index Unit: dB Range: -40 ... 40 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd S-SCH RP (dBm) Sc 3rd S-SCH RP (dBm) Sc 4th S-SCH RP (dBm) | S-SCH Received Power for each cell scanned Argument: [0 ... 504] Scanned index Unit: dBm Range: -140 ... 25 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd SSS CINR (dB) ... Sc 12th SSS CINR (dB) | Reference Signal CINR for each Nb-IoT/LTE-LAA cell scanned Argument: [0 ... 504] Scanned index Unit: dB Range: -40 ... 60 Chipset Vendors: PCTEL | ✔ |
Sc 2nd SSS RP (dBm) ... Sc 12th SSS RP (dBm) | Secondary Synchronization Signal Received Power for each NB-IoT/LTE-LAA cell scanned Argument: [0 ... 504] Scanned index Unit: dBm Range: -140 ... 25 Chipset Vendors: PCTEL | ✔ |
Sc 2nd SSS RQ (dB) ... Sc 12th SSS RQ (dB) | Secondary Synchronization Signal Received Quality for each NB-IoT/LTE-LAA cell scanned Argument: [0 ... 504] Scanned index Unit: dB Range: -40 ... 40 Chipset Vendors: PCTEL | ✔ |
Sc 2nd TAC ... Sc 12th TAC | Tracking Area Code of each cell scanned Argument: [0 ... 504] Scanned index Range: 0 ... 65535 Chipset Vendors: PCTEL, RohdeSchwarz | ✔ |
Sc 2nd Time Offset (samples) ... Sc 12th Time Offset (samples) | Time offset (in samples) from the beginning of the current frame, adjusted so that a frame begins at the GPS one-second tick epoch Argument: [0 ... 504] Scanned index Range: 0 ... 307199 Chipset Vendors: PCTEL | ✔ |
General information about Sc Best information elements: 'Sc Best' information elements combine cells from all scanned EARFCNs, sorted by descending RSRQ (Es/I0). The sorting order within the 'Best' elements is not affected by the settings in the General window (see UM section 'Sorting of Cells'). Argument: [0 ... 191] Best scanned index Unit: meter Range: 0 ... 100000 | ||
Name of each best cell scanned. Requires cell file. Argument: [0 ... 191] Best scanned index | ||
The power in the entire LTE best channel bandwidth Argument: [0 ... 191] Best scanned index Unit: dBm Range: -140 ... 25 | ||
Channel type is one of FDD, TDD, LAA, NB-IOT, UNKNOWN | ||
EARFCN of each best cell scanned Argument: [0 ... 191] Best scanned index Range: 0 ... 262143 | ||
Mobile country code of each best cell scanned Argument: [0 ... 504] Best scanned index Range: 0 ... 999 | ||
Mobile network code of each best cell scanned Argument: [0 ... 504] Best scanned index Range: 0 ... 999 | ||
Number of scanned best cells Range: 0 ... 191 | ||
PCI for each best cell scanned Argument: [0 ... 191] Best scanned index Range: 0 ... 503 | ||
Primary Synchronization Signal CINR for each Nb-IoT/LTE-LAA best cell scanned Argument: [0 ... 191] Best scanned index Range: -40 ... 60 | ||
Primary Synchronization Signal Received Power for each NB-IoT/LTE-LAA best cell scanned Argument: [0 ... 191] Best scanned index Range: -140 ... 25 | ||
Primary Synchronization Signal Received Quality for each NB-IoT/LTE-LAA best cell scanned Argument: [0 ... 191] Best scanned index Range: -40 ... 40 | ||
ECI, E-UTRAN Cell Identifier, of each best cell scanned, expressed in decimal format. ► 3GPP 36.300, section 8.2 Argument: [0 ... 504] Best scanned index Range: 0 ... 268435456 | ||
Reference Signal CINR for each best cell scanned Argument: [0 ... 191] Best scanned index Range: -40 ... 60 | ||
RSRP (sum total over all Tx ports) for each best cell scanned Argument: [0 ... 191] Best scanned index Range: -140 ... 25 | ||
RSRQ (sum total over all Tx ports) for each best cell scanned Argument: [0 ... 191] Best scanned index Range: -40 ... 40 | ||
PCTel P-SCH CINR for each best cell scanned. R&S S-SCH CINR for each best cell scanned. Argument: [0 ... 191] Best scanned index Range: -40 ... 60 | ||
Reference Signal CINR for each Nb-IoT/LTE-LAA best cell scanned Argument: [0 ... 191] Best scanned index Range: -40 ... 60 | ||
Secondary Synchronization Signal Received Power for each NB-IoT/LTE-LAA best cell scanned Argument: [0 ... 191] Best scanned index Range: -140 ... 25 | ||
Secondary Synchronization Signal Received Quality for each NB-IoT/LTE-LAA best cell scanned Argument: [0 ... 191] Best scanned index Range: -40 ... 40 | ||
Tracking Area Code of each best cell scanned Argument: [0 ... 504] Best scanned index Range: 0 ... 65535 | ||
Scanned cells exists on frequency Argument: [1 ... 24] Scanned frequency index | ||
General information about Sc RSSI information elements: Sc RSSI information elements derive from RSSI scanning. The argument, where present, is a sequence number pointing to scanned frequencies as specified by the 'Sc RSSI Frequency (MHz)' element, unless otherwise indicated. RSSI for each scanned cell Argument: [0 ... 1000] RSSI scanned index Unit: dBm Range: -140 ... 25 | ||
RSSI for each scanned cell Argument: [0 ... 262143] EARFCN Unit: dBm Range: -140 ... 25 | ||
Band to which each scanned cell belongs Argument: [0 ... 1000] RSSI scanned index | ||
Bandwidth used for each scanned cell Argument: [0 ... 1000] RSSI scanned index | ||
Number of cells scanned Range: 0 ... 1000 | ||
EARFCN of each scanned cell. Regarding EARFCN numbering, see ► 3GPP 36.101 Argument: [0 ... 1000] RSSI scanned index Range: 0 ... 262143 | ||
Frequency of each cell scanned Argument: [0 ... 1000] RSSI scanned index Unit: MHz Range: 410 ... 5925 | ||
Serving Cell 1 CQI Sub-band CW 0 Serving Cell 1 CQI Sub-band CW 1 ... Serving Cell 6 CQI Sub-band CW 1 | General information about Serving Cell information elements: 'Serving Cell' information elements pertain to the current serving cell or cells. In case of carrier aggregation (CA), the serving cells are distinguished in a subset of information elements. Argument description, Unless otherwise noted, 1 = primary serving cell and numbers above = secondary serving cell (CA). information elements lacking an argument are valid for the primary serving cell when CA is used. This is also true of elements whose argument has a different meaning, as detailed below. Sub-band CQIs for Code Word 0/1 Argument: [0 ... 27] Sub-band index Range: 0 ... 15 Chipset Vendors: Qualcomm, Intel | ✔ |
Number of serving cells: greater than one in case of carrier aggregation Range: 1 ... 6 | ||
Range: 1 ... 6 Chipset Vendors: Common | ✔ | |
Distance from UE to the serving cell. Requires cell file and UE positioning data. Unit: meter Range: 0 ... 100000 | ||
Downlink bandwidth of serving cell. One of: 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz, 20 MHz. Argument: [1 ... 6] Serving cell index Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Downlink EARFCN of each serving cell. Regarding EARFCN numbering, see ► 3GPP 36.101. Argument: [1 ... 6] Serving cell index Range: 0 ... 262143 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
Downlink frequency of serving cell Argument: [1 ... 6] Serving cell index Unit: MHz Range: 410 ... 5925 Chipset Vendors: Common | ✔ | |
Downlink pathloss for serving cell. Calculated as (eNodeB transmit power) – 'Serving Cell RSRP (dBm)'. The eNodeB transmit power is updated from the RRC Connection Reconfiguration message and (for single carrier only) from SIB 2. Argument: [1 ... 6] Serving cell index Unit: dB Range: 40 ... 190 Chipset Vendors: Qualcomm, Ericsson, Samsung, HiSilicon, Neul, Intel | ✔ | |
Argument: [1 ... 6] Serving cell index Chipset Vendors: Qualcomm | ✔ | |
Serving Cell Frame Timing Rx2 | Cell frame timing of each serving cell relative to the network's absolute time reference, as received on antenna Rx1/Rx2 Argument: [1 ... 6] Serving cell index Range: 0 ... 307199 Chipset Vendors: Qualcomm | ✔ |
Frequency band to which each serving cell EARFCN belongs Argument: [1 ... 6] Serving cell index Chipset Vendors: Common | ✔ | |
Indicates that the serving cell is a NB-IoT cell Argument: [1 ... 6] Serving cell index Range: 0 ... 1 Chipset Vendors: Qualcomm, Neul | ||
Mobile country code of serving cell Range: 0 ... 999 Chipset Vendors: Common | ✔ | |
Mobile network code of serving cell Range: 0 ... 999 Chipset Vendors: Common | ✔ | |
Name of serving cell. Requires cell file. | ||
Physical Layer Cell Identity of each serving cell. (NIDcell = 3 * NID1 + NID2). ► 3GPP 36.211, section 6.11 NIDcell: This is what we call 'PCI' NID1: This is what we call 'PCI (Group Part)' NID2: This is what we call 'PCI (Cell Part)' Argument: [1 ... 6] Serving cell index Range: 0 ... 503 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
Argument: [1 ... 6] Serving cell index Range: 0 ... 2 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
Argument: [1 ... 6] Serving cell index Range: 0 ... 167 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
PLMN (MCC and MNC) of serving cell Chipset Vendors: Qualcomm, Samsung, TemsBasicRadio, HiSilicon, Neul, Intel | ||
ECI, E-UTRAN Cell Identifier, of serving cell, expressed in decimal format. ► 3GPP 36.300, section 8.2 Range: 0 ... 268435456 Chipset Vendors: Qualcomm, Samsung, TemsBasicRadio, HiSilicon | ✔ | |
Cell Id part of ECI for serving cell, expressed in hexadecimal Chipset Vendors: Qualcomm, Samsung, TemsBasicRadio, HiSilicon | ✔ | |
Cell Id part (8 bits) of ECI for serving cell, expressed in decimal Range: 0 ... 255 Chipset Vendors: Qualcomm, Samsung, TemsBasicRadio, HiSilicon | ✔ | |
eNodeB Identifier part of ECI for serving cell, expressed in hexadecimal Chipset Vendors: Qualcomm, Samsung, TemsBasicRadio, HiSilicon | ✔ | |
eNodeB Identifier part (20 bits) of ECI for serving cell, expressed in decimal Range: 0 ... 1048575 Chipset Vendors: Qualcomm, Samsung, TemsBasicRadio, HiSilicon | ✔ | |
CINR for Reference Signal of each serving cell Argument: [1 ... 6] Serving cell index Unit: dB Range: -40 ... 60 Chipset Vendors: Qualcomm, Samsung, TemsBasicRadio, HiSilicon, Neul, Intel | ✔ | |
Serving Cell RS CINR Tx1 Rx1 (dB) Serving Cell RS CINR Tx1 Rx2 (dB) Serving Cell RS CINR Tx1 Rx3 (dB) Serving Cell RS CINR Tx1 Rx4 (dB) | RS CINR contribution from eNodeB antenna Tx1 as received on antenna Rx1/Rx2/Rx3/Rx4 Argument: [1 ... 6] Serving cell index Unit: dB Range: -40 ... 60 Chipset Vendors: Qualcomm, Samsung, Intel | ✔ |
RSRP for each serving cell. Sum of contributions from antennas Rx1 and Rx2. Argument: [1 ... 6] Serving cell index Unit: dBm Range: -140 ... 25 Chipset Vendors: Qualcomm, Samsung, TemsBasicRadio, HiSilicon, Neul, Intel | ✔ | |
Serving Cell RSRP Tx1 Rx1 (dBm) Serving Cell RSRP Tx1 Rx2 (dBm) Serving Cell RSRP Tx1 Rx3 (dBm) Serving Cell RSRP Tx1 Rx4 (dBm) | RSRP contribution from eNodeB antenna Tx1 as received on antenna Rx1/Rx2/Rx3/Rx4 Argument: [1 ... 6] Serving cell index Unit: dBm Range: -140 ... 25 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ |
RSRQ sum of contributions from all Rx antennas Argument: [1 ... 6] Serving cell index Unit: dB Range: -40 ... 40 Chipset Vendors: Qualcomm, Samsung, TemsBasicRadio, HiSilicon, Neul, Intel | ✔ | |
Serving Cell RSRQ Tx1 Rx1 (dB) Serving Cell RSRQ Tx1 Rx2 (dB) Serving Cell RSRQ Tx1 Rx3 (dB) Serving Cell RSRQ Tx1 Rx4 (dB) | RSRQ contribution from eNodeB antenna Tx1 as received on antenna Rx1/Rx2/Rx3/Rx4 Argument: [1 ... 6] Serving cell index Unit: dB Range: -40 ... 40 Chipset Vendors: Qualcomm, Samsung, Intel | ✔ |
Received signal strength on the EARFCN each serving cell is using Argument: [1 ... 6] Serving cell index Unit: dBm Range: -140 ... 25 Chipset Vendors: Qualcomm, Samsung, TemsBasicRadio, HiSilicon, Neul, Intel | ✔ | |
Serving Cell RSSI Tx1 Rx1 (dBm) Serving Cell RSSI Tx1 Rx2 (dBm) Serving Cell RSSI Tx1 Rx3 (dBm) Serving Cell RSSI Tx1 Rx4 (dBm) | RSSI contribution from eNodeB antenna Tx1 as received on antenna Rx1/Rx2/Rx3/Rx4 Argument: [1 ... 6] Serving cell index Unit: dBm Range: -140 ... 25 Chipset Vendors: Qualcomm, Samsung, Intel | ✔ |
This element is populated only for TEMS Pocket logfiles, taking the value 'Small Cell' for serving cells that have been identified in a transmitter file contained in an iBwave indoor map set, and 'Other Cell' otherwise Argument: [1 ... 6] Serving cell index Chipset Vendors: Common | ✔ | |
States if the serving cell supports enhanced machine type communication Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
Tracking area code of serving cell Range: 0 ... 65535 Chipset Vendors: Qualcomm, Samsung, TemsBasicRadio, HiSilicon, Intel | ✔ | |
Total Reference Signal power for serving cell, calculated from serving cell RSRP and channel bandwidth Unit: dBm Range: -140 ... 25 Chipset Vendors: Common | ✔ | |
Difference between transmit powers of eNodeB Tx1 and Tx2 antennas, as received on each Rx antenna. Each presented value is an average over 20 samples in the time domain. Argument: 0: Mean of Rx1 and Rx2 values 1: Rx1 2: Rx2 Argument: [0 ... 2] Serving cell index Unit: dB Range: -20 ... 20 Chipset Vendors: Qualcomm | ||
SC Serving cell, idle mode PCell Primary serving cell, connected mode SCell1 Secondary cell 1, connected mode, carrier aggregation ... SCellN Secondary cell N, connected mode, carrier aggregation Argument: [1 ... 6] Serving cell index Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
Argument: [1 ... 6] Serving cell index Chipset Vendors: Qualcomm, Samsung, Intel | ||
Uplink EARFCN of serving cell. Regarding EARFCN numbering, see ► 3GPP 36.101. Argument: [1 ... 6] Serving cell index Range: 0 ... 262143 Chipset Vendors: Common | ✔ | |
Uplink frequency of serving cell Argument: [1 ... 6] Serving cell index Unit: MHz Range: 410 ... 5925 Chipset Vendors: Common | ||
This element is populated only for TEMS Pocket logfiles, indicating which of the zones defined in an iBwave indoor map set each serving cell belongs to Argument: [1 ... 6] Serving cell index Chipset Vendors: Common | ✔ | |
General information about Spectr Ana Sc information elements: 'Spectr Ana Sc' information elements are populated by spectrum analysis scanning. The same elements are used for both uplink and downlink bands. The argument, where present, is a sequence number pointing to scanned frequencies as indicated by the 'Spectr Ana Sc Freq (kHz)' element. Scanned frequencies in ascending order Argument: [1 ... 3001] Spectr ana scanned index Unit: kHz Range: 410000 ... 5925000 Chipset Vendors: Common | ||
The number of frequencies swept by the scan Range: 0 ... 3001 | ||
RSSI of frequencies scanned Argument: [1 ... 3001] Spectr ana scanned index Unit: dBm Range: -140 ... 25 Chipset Vendors: Common | ||
Speed in km/h Unit: km/h Range: 0 ... 250 | ||
Speed in mph Unit: mph Range: 0 ... 160 | ||
Number of resource blocks allocated to transmission of sounding reference signals Range: 0 ... 100 Chipset Vendors: Qualcomm, HiSilicon | ||
Transmit power of sounding reference signal. ► 3GPP 36.211, section 5.5.3 Unit: dBm Range: -50 ... 23 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
Percentage of subframes in which the UE transmits a sounding reference signal Range: 0 ... 100 Chipset Vendors: Qualcomm | ||
General information about SSS Detected Cell information elements: 'SSS Detected Cell Count' information elements relate to the part of the cell search procedure making use of the Secondary Synchronization Signal. Argument 'SSS Detected Cell Index' points to a cell detected during the cell search. Number of cells detected Range: 0 ... 16 | ||
EARFCNs of cells detected Argument: [1 ... 16] SSS detected cell index Range: 0 ... 262143 Chipset Vendors: Qualcomm | ||
Argument: [1 ... 16] SSS detected cell index Range: 0 ... 503 Chipset Vendors: Qualcomm | ||
SSS power for cells detected, expressed as a value in decibel Argument: [1 ... 16] SSS detected cell index Range: -25 ... 20 Chipset Vendors: Qualcomm | ||
General information about Strongest Sc RSSI information elements: 'Strongest Sc RSSI' information elements contain RSSI scan data. The argument 'Strongest RSSI Scanned Index' are frequencies sorted by decreasing RSSI. Received signal strength Argument: [1 ... 16] Strongest RSSI scanned index Unit: dBm Range: -140 ... 25 | ||
Scanned frequency band Argument: [1 ... 16] Strongest RSSI scanned index | ||
Scanned EARFCN Argument: [1 ... 16] Strongest RSSI scanned index Range: 0 ... 262143 | ||
Scanned frequency Argument: [1 ... 16] Strongest RSSI scanned index Unit: MHz Range: 410 ... 5925 | ||
General information about TDD information elements: TDD information elements pertain to the TDD (Time Division Duplex) mode of operation within LTE, also known as TD-LTE. ACK/NACK feedback mode for TDD. ► 3GPP 36.212, section 5.2.2.6, 0: Multiplexing 1: Bundling Range: 0 ... 1 Chipset Vendors: Qualcomm | ✔ | |
Same as 'TDD Ack Reporting Mode' but in text format Chipset Vendors: Qualcomm | ✔ | |
Value distribution of Np+1, used in the calculation of n(1)PUCCH, resource index for PUCCH formats 1/1a/1b. ► 3GPP 36.213, section 10.1. Argument: [0 ... 14] Represents possible values of Np. 0: Value = 0 1: Value = 1 2: Value = 3 3: Value = 5 4: Value = 8 5: Value = 11 6: Value = 13 7: Value = 16 8: Value = 22 9: Value = 27 10: Value = 41 11: Value = 44 12: Value = 55 13: Value = 66 14: Value = 88 Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm | ||
Average number of the first CCE used for transmission of the corresponding PDCCH. ► 3GPP 36.213, section 10.1 (nCCE) Range: 0 ... 96 Chipset Vendors: Qualcomm | ||
Maximum number of the first CCE used for transmission of the corresponding PDCCH. Compare 'TDD n_CCE (Average)'. Range: 0 ... 96 Chipset Vendors: Qualcomm | ||
Minimum number of the first CCE used for transmission of the corresponding PDCCH. Compare 'TDD n_CCE (Average)'. Range: 0 ... 96 Chipset Vendors: Qualcomm | ||
Value distribution of Np, used in the calculation of n(1)PUCCH, resource index for PUCCH formats 1/1a/1b. ► 3GPP 36.213, section 10.1 Argument: [0 ... 14] Represents possible values of Np. 0: Value = 0 1: Value = 1 2: Value = 3 3: Value = 5 4: Value = 8 5: Value = 11 6: Value = 13 7: Value = 16 8: Value = 22 9: Value = 27 10: Value = 41 11: Value = 44 12: Value = 55 13: Value = 66 14: Value = 88 Range: 0 ... 100 Chipset Vendors: Qualcomm | ||
Value distribution of the index m for which km is the smallest value in the set K such that UE detects a PDCCH in subframe n – km (► 3GPP 36.213, section 10.1). Used in calculating n(1)PUCCH, resource index for PUCCH formats 1/1a/1b. Valid only when 'TDD Ack Reporting Mode' = Bundling. Argument: [0 ... 9] Represents possible values of m Unit: % Range: 0 ... 100 Chipset Vendors: Qualcomm | ||
TDD special subframe configuration. ► 3GPP 36.211, table 4.2‑1 Range: 0 ... 8 Chipset Vendors: Qualcomm, HiSilicon, Intel | ✔ | |
TDD uplink–downlink configuration. ► 3GPP 36.211, table 4.2-2 Range: 0 ... 6 Chipset Vendors: Qualcomm, HiSilicon, Intel | ✔ | |
TDD downlink-to-uplink switch-point periodicity. ► 3GPP 36.211, table 4.2-2 Range: 5 ... 10 Chipset Vendors: Common | ✔ | |
Current time in text format: 'hh:mm:ss.ddd', where 'ddd' = decimal seconds. | ||
Current time in ms Range: 0 ... 86400000 | ||
Time the UE stays in ACTIVE / IDLE mode following a wake-up to periodic tracking area update or initiate a mobile origination event Range: 0 ... 186 Chipset Vendors: Common | ✔ | |
The timer T3412 is reset and started with its initial value, when the UE goes from EMM-CONNECTED to EMM-IDLE mode. The timer is stopped when the UE enters EMM-CONNECTED mode or EMM-DEREGISTERED state. On expiry, the periodic TAU procedure is initiated. Range: 0 ... 595200 Chipset Vendors: Common | ✔ | |
Timing Advance, an adjustment of uplink transmission timing in relation to downlink timing, introduced to compensate for propagation delay. Regarding the mechanism, see ► 3GPP 36.321, section 5.2. For the representation of values, see ► 3GPP 36.213, section 4.2.3. Range: 0 ... 1282 Chipset Vendors: Qualcomm, HiSilicon, Intel | ✔ | |
'Timing Advance' value converted to distance in meters Unit: meter Range: 0 ... 100000 Chipset Vendors: Qualcomm, HiSilicon, Intel | ✔ | |
LTE transmission mode as numbered in ► 3GPP 36.213, Table 7.2.3-0. Updated from Layer 3 messages. Argument: [1 ... 6] Serving cell index Range: 1 ... 10 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
Same as 'Transmission Mode' but in text format ('TM-1', etc.). Argument: [1 ... 6] Serving cell index Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ✔ | |
PDSCH transmission scheme corresponding to 'Transmission Mode' as laid out in ► 3GPP 36.213, Table 7.2.3-0. Updated from UE mode reports. 1: Single-antenna transmission 2: Transmit diversity 3: Open-loop codebook-based precoding (in case of multiple layers) 4: Closed-loop codebook-based precoding 5: Multi-user MIMO version of mode 4 6: Closed-loop codebook-based precoding using single-layer transmission 7: Non-codebook-based precoding supporting single-layer PDSCH transmission 8: Non-codebook-based precoding supporting up to two layers 9: Non-codebook-based precoding supporting up to eight layers (extension of scheme 8) 10: Extension of scheme 9 for enhanced support of different means of downlink multi-point coordination and transmission (CoMP) Argument: [1 ... 6] Serving cell index Range: 1 ... 9 Chipset Vendors: Qualcomm, Samsung, Intel | ✔ | |
Same as 'Transmission Scheme' but in text format with explanatory strings similar to those above Argument: [1 ... 6] Serving cell index Chipset Vendors: Qualcomm, Samsung, Intel | ✔ | |
Argument: [1 ... 6] Serving cell index Range: 1 ... 4 Chipset Vendors: Qualcomm, Samsung | ||
E-UTRA UE category Downlink. ► 3GPP 36.306 Range: 0 ... 19 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ||
E-UTRA UE category Downlink. ► 3GPP 36.306 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ||
E-UTRA UE category NarrowBand IoT. ► 3GPP 36.306 Range: 1 ... 2 Chipset Vendors: Qualcomm, Neul | ||
E-UTRA UE category NarrowBand IoT. ► 3GPP 36.306 Chipset Vendors: Qualcomm, Neul | ||
E-UTRA UE category Uplink. ► 3GPP 36.306 Range: 0 ... 15 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ||
E-UTRA UE category Uplink. ► 3GPP 36.306 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Intel | ||
UE EUTRA-NR dual connectivity support Chipset Vendors: Qualcomm | ✔ | |
UE PUCCH Channel average transmit power Unit: dBm Range: -50 ... 30 Chipset Vendors: Qualcomm, Samsung, HiSilicon | ✔ | |
UE PUSCH Channel average transmit power Argument: [1 ... 6] Serving cell index Unit: dBm Range: -50 ... 30 Chipset Vendors: Qualcomm, Samsung, HiSilicon, Neul, Intel | ✔ | |
UE average transmit power Unit: dBm Range: -50 ... 30 Chipset Vendors: Samsung | ✔ | |
0 Unknown status 1 Idle 2 Active 3 Holding 4 Originating Call 5 Alerting 6 Incoming Call 7 Disconnecting 8 Incoming Call Initiated Range: 0 ... 8 Chipset Vendors: Common | ||
See 'Video Call State (Num)' Chipset Vendors: Common | ||
General information about WCDMA Neighbor information elements: WCDMA neighbors are sorted by decreasing CPICH Ec/N0. CPICH Ec/N0 of measured WCDMA neighbors Argument: [1 ... 32] WCDMA neighbor index Unit: dB Range: -34 ... 0 Chipset Vendors: Qualcomm, Ericsson, Samsung | ||
CPICH RSCP of measured WCDMA neighbors Argument: [1 ... 32] WCDMA neighbor index Unit: dBm Range: -140 ... -15 Chipset Vendors: Qualcomm, Ericsson, Samsung | ||
Scrambling codes of measured WCDMA neighbors Argument: [1 ... 32] WCDMA neighbor index Range: 0 ... 511 Chipset Vendors: Qualcomm, Ericsson, Samsung | ||
UARFCNs of measured WCDMA neighbors Argument: [1 ... 32] WCDMA neighbor index Range: 0 ... 16383 Chipset Vendors: Qualcomm, Ericsson, Samsung | ||
Number of measured WCDMA neighbors Range: 0 ... 32 |