Preparations for On-device Testing

57.4 Preparations for On-device Testing

Note: On-device software only works on devices running Android 5.1 or later.

Before you can start ODM testing, you need to get the ODM software on your devices licensed by Infovista. To this end, Infovista needs to know the equipment identities (IMEIs or MEIDs) of your ODM devices. These will usually have been stated in the product order, but if not, they need to be provided to Infovista by some other means – for example, by email – before ODM can be licensed on the devices.

To place a request for licensing of the ODM software:

Make sure the device has an Internet connection (over a cellular network, Wi-Fi, or other).

Connect the device in TEMS Investigation.

Right-click the device in the Navigator and select the Install On-device to UE command. See section "The Navigator Equipment Tab: Basics" for further details.

Restart the device.

After issuing this request, keep the device turned on for at least two minutes so as to fully ensure that the ODM request is sent successfully.

You will be notified by Infovista when the ODM software has been licensed. Please note that this may take 1–2 days, although the procedure will usually be faster. Following this, you need to reboot the device twice to make it ready for on-device measurement.

The software for all of the various ODM services is included in the same download package; there is no need for any separate downloads to obtain software for specific services.