102.7 Signaling Presentation Windows

Regarding message windows in general, see UM chapter "Message Windows".

Window Name

Description

Message windows

Data Reports

Lists messages pertaining to data service testing. Also lists H.245 and IP protocol reports.

Error Reports

Lists reports from the external device concerning malfunctions and received corrupt messages. The Events and Columns tabs are absent from the properties dialog of this window (UM sections "Events Tab"–"Columns Tab").

Events

Lists all events that occur, both predefined and user-defined, with the exception of KPI-related events. All predefined events are listed in chapter "Predefined Events" of this volume; how to create user-defined events is covered in UM section "Setting Up a User-defined Event".

As in other message windows, you can double-click an event in the Events windows to view details on the event in a separate plain-text window. For certain events, extra information is provided. The contents of this extra information are detailed in chapter "Predefined Events".

Events Of KPI Type

Lists all events underlying the computation of KPI statistics in TEMS Discovery Device. See section "Data Service Testing Events".

IP Protocol Reports

Lists all air interface message traffic occurring over the protocols in the Internet protocol suite:

Application layer: BOOTP, DNS, FTP, FTP-DATA, HTTP, NBDS, NBNS, RTCP, RTP, RTSP, SNMP

Transport layer: TCP, UDP

Network layer: ICMP, IPv4, IPv6

Data link layer: PPP CC, PPP CHAP, PPP IPCP, PPP LCP, PPP PAP

Regarding IP sniffing, see UM sections "Network Connect", "Start IP Sniffing", "Stop IP Sniffing".

Layer 2 Messages

Lists Layer 2 messages. By default this window also shows certain events, the emphasis being on call, handover, and failure events: see chapter "Predefined Events".

Layer 3 Messages

Lists Layer 3 messages. By default this window also shows certain events, the emphasis being on call, handover, and failure events: see chapter "Predefined Events".

Mode Reports

Lists (vendor-specific) reports from external devices concerning their status. By default this window also shows certain events, the emphasis being on call, handover, and failure events: see chapter "Predefined Events".

RTP/UDP/SIP Reports

Lists RTP, UDP, and SIP messages.

SIP Reports

Lists SIP messages.