Event | Category | Description |
|---|---|---|
APP | External application launch | External application is launched by a script |
CAA | Call attempt | Originated call when the user has pressed the SEND key. If the point in time when the SEND key was pressed is not known, the point in time when the setup signaling message is sent to the network is used. In case of incoming calls, the point in time when the network received the setup message is used. Setup is used instead of paging request, because information on the call type (voice or data; voice is only acceptable here) is first available in setup messaging. The CAA measurement evkent begins the call attempt state |
CAC | Call connect success | Recorded in different stages of call establishment. This measurement event begins the call connection state. |
CAD | Call disconnect | Recorded when call has ended and upper layer (call control layer with GSM and UMTS) signaling has released the call. The CAD measurement event ends call connection state. |
CAF | Call failed | Recorded when there is a timeout or a call release before dedicated radio resource allocation for the call. Recorded on timeout after CAA event when no service available. The CAF measurement event ends call attempt state. |
CAI | Incoming call | Mobile Terminating incoming call |
CALLMODI | Call modification indication | Recorded when call type is modified. |
CREL | Cell reselection | Recorded after cell reselection. With GSM, UMTS FDD, and LTE, the measurement event is recorded based on cell ID change in non-TCH state with GSM and in non-CELL_DCH state with UMTS FDD. |
CRELI | Cell reselection information | Recorded during the data transfer for LTE to LTE, LTE to HSPA, and HSPA to LTE cell reselection and redirection. |
DAA | Data connection attempt | Data call connection and packet active state |
DAC | Data connection success | Recorded when data connection received from the server. For non-connection TCP-based protocols (e.g. HTTP), this is recorded when the socket connection is established. This measurement event begins the data connection state. |
DAD | Data disconnect | Recorded when the connection to the server is disconnected. For TCP-based protocols this means that the socket connection has been terminated. The measurement event ends the data connection state. |
DAF | Data connection failed | Recorded after DAA measurement event after connection attempt to server has failed. For connection-based protocols, the logging to the server has failed, and for non-connection based TCP protocols, the socket connection cannot be established. This measurement event ends the data connection attempt state. |
DCHR | Data channel request | Data call connection state |
DCOMP | Data transfer completed | Recorded when data transfer is stopped. For TCP based protocols when the socket connection to the server is terminated. The measurement event ends the data transfer state. |
DNSQUERY | DNS query | Recorded after DNS query |
DREQ | Data transfer request | Recorded when data transfer is requested to or from the server. Begins the data transfer state. |
DSS | Data stream status | Recorded when the data stream state changes. |
GAA | GPRS attach attempt | Recorded based on signaling when GPRS attach is attempted. This measurement event begins the attach attempt state. |
GAC | GPRS attach connected | Recorded based on signaling when attach attempt is successful. This measurement event begins the attach state. |
GAD | GPRS detach | Recorded when detach is completed. This measurement event terminates the attach state. |
GAF | GPRS attach failed | Recorded based on signaling when attach attempt fails. This measurement event terminates the attach attempt state. |
HOA | Handover/handoff attempt | Recorded based on signaling when a handover fails. This measurement event ends the handover attempt state. |
HOF | Handover/handoff fail | Recorded based on signaling when a handover fails. This measurement event ends the handover attempt state. |
HOS | Handover/handoff success | Recorded based on signaling when a handover is successful. This measurement event ends the handover attempt state. |
LUA | Location update attempt | Recorded when the mobile starts location area update using MM layer3 signaling message. This measurement event begins the location area update state. |
LUF | Location update fail | Recorded based on MM layer3 signaling when location area update has failed. This measurement event terminates the location area update state. |
LUS | Location update accepted | Recorded based on MM layer3 signaling when location area update has been successful. This measurement event terminates the location area update state. |
MACI | MAC layer info | Recorded when L1/MAC layer information changes. |
MBMSI | MBMS information | Recorded when MBMS allocation changes. |
MEI | Measurement event information | Recorded when a UMTS, LTE or NR measurement event is transmitted to the network based on signaling messages. |
MSGA | Message sending/receiving attempt | Recorded when SMS, MMS, or USSD message sending is attempted or a message is received. This measurement event begins the SMS, MMS, and USSD transmission state. |
MSGF | Message sending/receiving failed | Recorded when SMS, MMS, or USSD message sending fails. This measurement event terminates the SMS, MMS, and USSD transmission state. |
MSGS | Message sending/receiving success | Recorded when SMS, MMS, or USSD message is sent or received successfully. The SMS message is considered successfully received when the response from the SMS server is received. Terminates the SMS, MMS, and USSD transmission state. |
PAA | Packet session activation attempt | Recorded when the user initiates the packet session activation attempt. If this information is not available, the measurement event is recorded with both GSM and UMTS when ACTIVATE_PDP_CONTEXT_REQUEST signaling message is sent to the network. Note that PAA, PAC, PAF, and PAD measurement events are not an exact match with the PDP context in GSM and UMTS but are instead used to describe "general" packet session. E.g. some modem initialization or attach can be done before the PDP CONTEXT REQUEST signaling message is sent to the network. If the packet session is active in the beginning of the measurement, the PAA and PAC pair is recorded immediately at the beginning of the measurement. This measurement event begins the packet activation attempt state. |
PAC | Packet session activated | Recorded when packet session activation is successful on NAS layer. Normally this is based on signaling messages but there can be other basis as well (e.g. if packet session is active when measurement is started, the measurement event is recorded immediately). This measurement event starts the packet active state. |
PAD | Packet session deactivated | Recorded when packet session is terminated. The measurement event is not recorded before the packet session has been terminated by BOTH the NAS signaling layer AND the possible operating system-based services used for the connection (e.g. with the Microsoft Windows, the RAS has terminated the connection). This measurement event terminates the packet active state. |
PAF | Packet session activation failed | Recorded when packet session activation attempt fails. The failure can be based on signaling, trace interface, or Microsoft Windows Operating System RAS causes. This measurement event terminates the packet activation attempt state. |
PAUSE | Pause | Recorded when the measurement is paused by the user. |
PBA | Packet bearer allocation | Recorded when the EPS bearer allocation is attempted. This is based on the NAS signaling or information received from the trace interface. Also this can be logged to the beginning of the measurement file to indicate already established EPS bearer. |
PBC | Packet bearer allocation | Recorded when the EPS bearer allocation succeeded. This is based on NAS signaling or information received from the trace interface. Also this can be logged to the beginning of the measurement file to indicate already established EPS bearer. |
PBD | Packet bearer allocation | Recorded when the EPS bearer is released. This is based on NAS signaling or information received from the trace interface. |
PBF | Packet bearer allocation | Recorded when the EPS bearer allocation failed. This is based on NAS signaling or information received from the trace interface. |
PSM | Power saving mode | Recorded when power save mode state changes. |
PSMI | Power saving mode | Recorded when PSM related parameters changes. |
PSMR | Power saving mode | Recorded when PSM related parameters are requested with attach request or tracking area update request L3 messages. |
PTTA | Push-to-talk session attempt | Recorded when the push-to-talk state changes. |
PTTC | Push-to-talk session connected | Recorded when push-to-talk session activation is successful. This measurement event begins the push-to-talk session state. |
PTTD | Push-to-talk session disconnected | Recorded when push-to-talk session is terminated. This measurement event terminates the push-to-talk session state. |
PTTF | Push-to-talk session failed | Recorded when push-to-talk session activation fails. This measurement event terminates the push-to-talk session activation attempt state. |
QSPN | Quality of service profile negotiated | Recorded when the first QoS configuration is received or the current one is reconfigured. This information is based on NAS signaling. |
QSPR | Quality of service profile request | Recorded when new QoS profile is requested or reconfigured. Information is based on configured QoS settings and NAS signaling. |
RABA | Radio access bearer allocation | Recorded when radio access bearer allocation is attempted. This is based on the RRC signaling or information received from the trace interface. Also this can be logged to the beginning of the measurement file to indicate already established RAB. |
RABC | Radio access bearer allocation | Recorded when radio access bearer allocation succeeded. This is based on RRC signaling or information received from the trace interface. Also this can be logged to the beginning of the measurement file to indicate already established RAB. |
RABD | Radio access bearer allocation | Recorded when radio access bearer is deallocated. This is based on RRC signaling or information received from the trace interface. |
RABF | Radio access bearer allocation | Recorded when radio access bearer allocation is failed. This is based on RRC signaling or information received from the trace interface. |
RACHSM | RACH MSG | Recorded when RACH message is transmitted or received. |
ROAM | Roaming Status Changes | Recorded when roaming state information changes. |
RRA | Radio resource connection attempt | Recorded based on RRC signaling when RRC connection is attempted. This measurement event begins the RRC connection attempt state. |
RRC | Radio resource connection success | RRC Connection success |
RRD | Radio resource connection release | Recorded based on RRC signaling when RRC connection is released. This measurement event terminates the RRC connection state. |
RRF | Radio resource connection failure | Recorded based on RRC signaling when RRC connection attempt fails. This measurement event terminates the RRC connection attempt state. |
RRRE | LTE RRC Reestablishment | Recorded based on RRC signaling after successful or failed RRC connection reestablishment. |
RTPBUFFER | RTP Information | Recorded when parameter sample is received from the device and the received sample differs from the previous result. Sampling period is approximately 500ms. |
RTPJITTER | RTP Information | Recorded when parameter sample is received from the device and the received sample differs from the previous result. Sampling period is approximately about 500ms. |
RTPJITTERU | RTP Information | Recorded when INFO SIP message contains the logged parameters. |
RUA | Routing area update attempt | Recorded based on GMM signaling when routing area update is attempted. This measurement event begins the routing area update attempt state. |
RUF | Routing area update fail | Recorded based on GMM signaling when routing area update is successful. This measurement event terminates the routing area update attempt state. |
RUS | Routing area update successful | Recorded based on GMM signaling when routing area update is successful. This measurement event terminates the routing area update attempt state. |
SCELLMOD | Serving cell modification | Recorded when there has been serving cell set change attempt. Event information is based on RRC signaling. |
SEI | Service Status Changes | Recorded when service state or mobility information changes. |
SHO | Soft handover | Recorded when the active set changes. Event information is based on RRC signaling with UMTS FDD. |
SHOI | Soft handover event information | Soft handover event triggered |
SIPREGA | SIP server registration attempt | Recorded when the user initiates the SIP server (or similar) registration attempt. This measurement event begins the SIP server registration attempt state. |
SIPREGC | SIP server registration completed | Recorded when registration to the SIP server (or similar) succeeded and the connection is now established to the SIP server. This measurement event begins the SIP server registerion state. |
SIPREGD | SIP server deregistered | Recorded when the device is deregistered from the SIP server (or similar). This measurement event terminates the SIP server registration state. |
SIPREGF | SIP server registration failed | Recorded when registration to the SIP server (or similar) fails. This measurement event terminates the SIP server registration attempt state. |
SIPREGRE | SIP server reregistration | Recorded after successful or failed SIP server re-registration attempt. |
TBFULE | TBF uplink establishment | Recorded after TBF uplink establishment attempt. The recorded information is based on RLC/MAC and layer3 signaling messages. |
TNOTE | Textual user note | Recorded when textual note is recorded by the user. |
TUA | LTE Tracking Area Update | Recorded based on EMM signaling when tracking area update is attempted. For more information about the tracking area update procedure, see 3GPP TS 124.301 subclause 5.5.3. This measurement event begins the tracking area update attempt state. |
TUF | LTE Tracking Area Update | Recorded based on EMM signaling when tracking area update is successful. For more information about the tracking area update procedure, see 3GPP TS 124.301 subclause 5.5.3. This measurement event terminates the routing area update attempt state. |
TUS | LTE Tracking Area Update | Recorded based on EMM signaling when tracking area update is successful. For more information about the tracking area update procedure, see 3GPP TS 124.301 subclause 5.5.3. This measurement event terminates the tracking area update attempt state. |
VOIPI | VoIP Information | Recorded when VoIP information changes. |